Accidents caused by slipping on wet surfaces are common in marine working environments but particularly on ships, boats, yachts and other water vessels.
Coruba specialises in anti-slip rubber matting that provides:
- A unique and attractive design
- Outstanding quality and a premium grade
- A slip resistant embossed pattern on the surface
Coru591: Rhombus Rubber Matting
With a unique diamond pattern, the Coru591 Rhombus Rubber Matting is a high-quality rubber matting product with excellent non-slip characteristics. Available in a range of colours (black, blue, grey, fawn and white), it provides aesthetically pleasing slip protection in steep and inclined areas.
Product Features
- Made from either SBR/NR or EPDM/SBR polymers
- Hardness: 70° shore
- Density: 1.4 SG
- Tensile strength: 4.0 Mpa
- Elongation: 150%
- Abrasion resistance: 200mm3
- Temperature range: -20°C to +70°C
The Coru591 is available in varying measurements and colours subject to minimum batch run quantities of 100m2 per size or colour.
PVC Rubber Boat Matting
Made from economic grade PVC, our range of PVC rubber boat matting products demonstrate a unique design on one side and a plain, smooth surface on the other:
- Coru560 Ribbed PVC Runner Matting
- Coru561 Circular Stud Pattern PVC Matting
- Coru562 Pyramid Pattern PVC Runner Matting
- Coru563 Pebble Finish PVC Runner Matting
Suitable for specific wet area applications, our PVC rubber matting also boasts the following characteristics:
- Safe, hygienic and non-toxic
- Oil and grease resistant
- Economically priced
- Good floor to foot cold insulation properties
Product Features
- Stock roll size of 10m x 1.2m x 2.5mm
- Weight: 3.6 kg/m2
- Hardness: 75° shore
- Density: 1.8 SG
- Tensile strength: 1.8 Mpa
- Elongation: 200%
- Abrasion resistance: 250mm3
- Temperature range: -20°C to +100°C
Coru549: UTE Heavy-Duty Open Ring Design Matting
Durable and hardwearing, the Coru549 UTE Heavy-Duty Open Ring Design Matting is ideal for different applications that require good fluid drainage. With good impact resistance, it can provide permanent or temporary slip resistant walkway protection.
Product Features
- Made from the NR/SBR polymers
- Hardness: 70°+5 shore
- Tensile strength: 5.00 Mpa
- Abrasion resistance: 200mm3
- Temperature range: -20°C to +70°C
For bespoke orders, our rubber matting products can also be produced in varying widths, lengths and thickness formats depending on the grade – to meet specific requirements. Phone us on 01702 560194 today with any enquiries and for further information about our anti-slip rubber mats… because at Coruba, your safety is our top priority!
