*Terms and conditions apply
If you would like to discuss this product, or you require a sample, please call 01702 560194. Alternatively, you can use our contact form.
Please note: All cut material is non-returnable unless faulty as these are non-sellable and have been cut to specific requirements.
Blue Metal Detactable FDA Approved Silicone Gasket
- Approved to FDA 21 CFR 177.2600 – EU1935/2004 Compliant
- REACH, RoHS, PAH and CE compliant
- Metal Detectable Silicone: 60° Shore
- Blue – RAL 5026
- View material – Coru1442
Call for Price
You save (%)
Chemical Resistances
|
PROPERTIES |
TEST METHOD |
VALUES FPS UNITS |
TEST METHOD |
VALUES METRIC UNITS |
|
SPECIFIC GRAVITY |
DIN 53508 |
1.30 |
ASTM D297 |
1.30 |
|
HARDNESS |
DIN 53505 |
60 ± 5 SH A |
ASTM D2240 |
60 ± 5 SH A |
|
TENSILE STRENGTH ( MIN ) |
DIN 53504 |
853 PSI |
ASTM D412 |
60 KG/CM2 |
|
ELONGATION AT BREAK ( MIN ) |
DIN 53504 |
300% |
ASTM D412 |
300% |
|
COMPRESSION SET (70º C/24 HRS/25% SET) (MAX) |
DIN 53517 |
45% |
ASTM D395 METHOD B |
45% |
|
TEAR RESISTANCE ( ANGULAR ) MIN |
DIN 53515 |
95 LBS/INCH |
ASTM D624 |
17 KG/CM |
|
POLYMER CONTENT (%) |
|
|
|
100 |
|
CHANGE IN PROPERTIES |
|
|
|
|
|
HEAT AGEING ( 72 HRS. AT 100 ºC ) |
|
|
ASTM D573 |
|
|
— HARDNESS (PTS) |
|
+ 1 (MAX) |
|
+ 1 (MAX) |
|
— TENSILE STRENGTH (%) |
|
±5 |
|
±5 |
|
— ELONGATION AT BREAK (%) |
|
±5 |
|
±5 |
|
VOLUME SWELL : AT 70º C FOR 72 HRS/IN |
|
|
ASTM D 471 |
|
|
IRM OIL NO.1 |
|
NA |
|
NA |
|
IRM OIL NO.2 |
|
NA |
|
NA |
|
IRM OIL NO.3 |
|
NA |
|
NA |
|
CHEMICAL RESISTANCE |
|
|
|
|
|
— OZONE |
|
EXCELLENT |
ASTM D 1149 |
EXCELLENT |
|
— DILUTE ACIDS AND BASES |
|
FAIR |
|
FAIR |
|
— CONCENTRATED ACIDS AND BASES |
|
FAIR |
|
FAIR |
|
— OILS |
|
FAIR |
|
FAIR |
|
— SOLVENTS |
|
FAIR |
|
FAIR |
|
TEMPERATURE RANGE |
|
-60 º TO + 200º C |
|
-60 º TO + 200º C |
|
COLOUR |
|
RAL 5026 BLUE |
|
RAL 5026 BLUE |
|
POLYMER CONTENT (%) |
|
100 |
|
|
| PROPERTIES | TEST METHOD | VALUES FPS UNITS | TEST METHOD | VALUES METRIC UNITS |
| SPECIFIC GRAVITY | DIN 53508 | 1.30 | ASTM D297 | 1.30 |
| HARDNESS | DIN 53505 | 60 ± 5 SH A | ASTM D2240 | 60 ± 5 SH A |
| TENSILE STRENGTH ( MIN ) | DIN 53504 | 853 PSI | ASTM D412 | 60 KG/CM2 |
| ELONGATION AT BREAK ( MIN ) | DIN 53504 | 300% | ASTM D412 | 300% |
| COMPRESSION SET (70º C/24 HRS/25% SET) (MAX) | DIN 53517 | 45% | ASTM D395 METHOD B | 45% |
| TEAR RESISTANCE ( ANGULAR ) MIN | DIN 53515 | 95 LBS/INCH | ASTM D624 | 17 KG/CM |
| POLYMER CONTENT (%) | 100 | |||
| CHANGE IN PROPERTIES | ||||
| HEAT AGEING ( 72 HRS. AT 100 ºC ) | ASTM D573 | |||
| — HARDNESS (PTS) | + 1 (MAX) | + 1 (MAX) | ||
| — TENSILE STRENGTH (%) | ±5 | ±5 | ||
| — ELONGATION AT BREAK (%) | ±5 | ±5 | ||
| VOLUME SWELL : AT 70º C FOR 72 HRS/IN | ASTM D 471 | |||
| IRM OIL NO.1 | NA | NA | ||
| IRM OIL NO.2 | NA | NA | ||
| IRM OIL NO.3 | NA | NA | ||
| CHEMICAL RESISTANCE | ||||
| — OZONE | EXCELLENT | ASTM D 1149 | EXCELLENT | |
| — DILUTE ACIDS AND BASES | FAIR | FAIR | ||
| — CONCENTRATED ACIDS AND BASES | FAIR | FAIR | ||
| — OILS | FAIR | FAIR | ||
| — SOLVENTS | FAIR | FAIR | ||
| TEMPERATURE RANGE | -60 º TO + 200º C | -60 º TO + 200º C | ||
| COLOUR | BLUE – RAL 5026 | BLUE – RAL 5026 | ||
| POLYMER CONTENT (%) | 100 |
Extraction Data Test Results
Test Name: Determination of Amount of Extractives
Method : With reference to US FDA 21 CFR 177.2600
For use in contact with aqueous food:
| EXTRACTANTS | TEST CONDITIONS | RESULT
(MG/INCH²) |
REPORTING LIMIT
(MG/INCH²) |
PERMISSIBLE LIMIT
(MG/INCH²) |
| Distilled Water | Reflux Temperature for 7 Hours | ND | 0.1 | 20 |
| Succeeding 2 Hours of extraction | ND | 0.1 | 1 | |
| Comment | – – | PASS | – – | – – |
For use in contact with fatty food
| EXTRACTANTS | TEST CONDITIONS | RESULT
(MG/INCH²) |
REPORTING LIMIT
(MG/INCH²) |
PERMISSIBLE LIMIT
(MG/INCH²) |
| n-Hexane | Reflux Temperature for 7 Hours | ND | 0.1 | 175 |
| Succeeding 2 Hours of extraction | ND | 0.1 | 4 | |
| Comment | – – | PASS | – – | – – |
Notes:
- mg/inch² = milligram per square inch
- ND = Not Detected
- Test Condition has been provided by client
| PROPERTIES | TEST METHOD | VALUES FPS UNITS | TEST METHOD | VALUES METRIC UNITS |
| SPECIFIC GRAVITY | DIN 53508 | 1.30 | ASTM D297 | 1.30 |
| HARDNESS | DIN 53505 | 60 ± 5 SH A | ASTM D2240 | 60 ± 5 SH A |
| TENSILE STRENGTH ( MIN ) | DIN 53504 | 853 PSI | ASTM D412 | 60 KG/CM2 |
| ELONGATION AT BREAK ( MIN ) | DIN 53504 | 300% | ASTM D412 | 300% |
| COMPRESSION SET (70º C/24 HRS/25% SET) (MAX) | DIN 53517 | 45% | ASTM D395 METHOD B | 45% |
| TEAR RESISTANCE ( ANGULAR ) MIN | DIN 53515 | 95 LBS/INCH | ASTM D624 | 17 KG/CM |
| POLYMER CONTENT (%) | 100 | |||
| CHANGE IN PROPERTIES | ||||
| HEAT AGEING ( 72 HRS. AT 100 ºC ) | ASTM D573 | |||
| — HARDNESS (PTS) | + 1 (MAX) | + 1 (MAX) | ||
| — TENSILE STRENGTH (%) | ±5 | ±5 | ||
| — ELONGATION AT BREAK (%) | ±5 | ±5 | ||
| VOLUME SWELL : AT 70º C FOR 72 HRS/IN | ASTM D 471 | |||
| IRM OIL NO.1 | NA | NA | ||
| IRM OIL NO.2 | NA | NA | ||
| IRM OIL NO.3 | NA | NA | ||
| CHEMICAL RESISTANCE | ||||
| — OZONE | EXCELLENT | ASTM D 1149 | EXCELLENT | |
| — DILUTE ACIDS AND BASES | FAIR | FAIR | ||
| — CONCENTRATED ACIDS AND BASES | FAIR | FAIR | ||
| — OILS | FAIR | FAIR | ||
| — SOLVENTS | FAIR | FAIR | ||
| TEMPERATURE RANGE | -60 º TO + 200º C | -60 º TO + 200º C | ||
| COLOUR | BLUE – RAL 5026 | BLUE – RAL 5026 | ||
| POLYMER CONTENT (%) | 100 |
Extraction Data Test Results
Test Name: Determination of Amount of Extractives
Method : With reference to US FDA 21 CFR 177.2600
For use in contact with aqueous food:
| EXTRACTANTS | TEST CONDITIONS | RESULT
(MG/INCH²) |
REPORTING LIMIT
(MG/INCH²) |
PERMISSIBLE LIMIT
(MG/INCH²) |
| Distilled Water | Reflux Temperature for 7 Hours | ND | 0.1 | 20 |
| Succeeding 2 Hours of extraction | ND | 0.1 | 1 | |
| Comment | – – | PASS | – – | – – |
For use in contact with fatty food
| EXTRACTANTS | TEST CONDITIONS | RESULT
(MG/INCH²) |
REPORTING LIMIT
(MG/INCH²) |
PERMISSIBLE LIMIT
(MG/INCH²) |
| n-Hexane | Reflux Temperature for 7 Hours | ND | 0.1 | 175 |
| Succeeding 2 Hours of extraction | ND | 0.1 | 4 | |
| Comment | – – | PASS | – – | – – |
Notes:
- mg/inch² = milligram per square inch
- ND = Not Detected
- Test Condition has been provided by client