Hydrogenated Nitrile Gasket

Free delivery on orders over £1200.00, all other orders have a fixed rate of £20.00 + VAT.
*Terms and conditions apply

If you would like to discuss this product, or you require a sample, please call 01702 560194. Alternatively, you can use our contact form.

Please note: All cut material is non-returnable unless faulty as these are non-sellable and have been cut to specific requirements.

Download Hydrogenated Nitrile Gasket Datasheet

Chemical Resistances

Brine, Calcium Chloride, Carbon Dioxide, Carbon Monoxide, Castor Oil, Corn Oil, Crude Oil, Diesel Oil, Fatty Acids, Gasoline, Hydraulic Fluid, Hydrogen Gas, Hydrogen Sulphide, Jet Fuels, Kerosene, Lard, Lime, Linoleic Acid, Linseed Oil, LPG, Lubricating Oils, Mineral Oil, Natural Gas, Neon Gas, Nitrogen, Oil Petroleum, Oleic Acid, Paraffin Wax, Pentane, Petroleum Oils, Pine Oil, Propane, Sea Water, Sewage, Steam, Sulfuric Acid, Toluene, Transformer Oil, Urea, Varnish

Reviews

Properties	Test Method	Values	Tested Method	Values
Properties	Test Method	FPS Units	Tested Method	Metric Units
Specific Gravity	DIN 53509	1.20 ± 0.05	ASTM D297	1.20 ± 0.05
Hardness	DIN 53505	70 ± 5 Sh A	ASTM D2240	70 ± 5 Sh A
Tensile Strength (min)	DIN 53504	1422 PSI	ASTM D412	100kg/cm²
Elongation at Break (min)	DIN 53504	200%	ASTM D412	200%
Compression Set (70^oC/24hrs/25% set) (max)	DIN 53517	50%	ASTM D395	50%
			Method B
Tear Resistance (Angular) (min)	DIN 53515	250lbs/inch	ASTM D624	45kg/cm
Change in Properties
Heat Ageing (72 hrs at 70^oC)			ASTM D573
– Hardness (Pts)		+2 (Max)		+2 (Max)
– Tensile Strength (%)		+5		5
– Elongation at Break (%)		±10		±10
Volume Swell: At 70^oC for 72 hrs/in			ASTM D471
IRM No.901		1%		1%
IRM No.902		5%		5%
IRM No.903		10%		10%
Polymer Content (Hydrogenated Chemical Resistance)		100%		100%
– Ozone		Excellent	ASTM D1149	Excellent
– Dilute Acids and Bases		Excellent		Excellent
– Concentrated Acids and Bases		Fair		Fair
– Oils		Excellent		Excellent
– Solvents		Good		Good
Temperature Range		-30^o to 150^oC		-30^o to 150^oC
Colour		Black		Black

Properties	Test Method	Values	Tested Method	Values
Properties	Test Method	FPS Units	Tested Method	Metric Units
Specific Gravity	DIN 53509	1.20 ± 0.05	ASTM D297	1.20 ± 0.05
Hardness	DIN 53505	70 ± 5 Sh A	ASTM D2240	70 ± 5 Sh A
Tensile Strength (min)	DIN 53504	1422 PSI	ASTM D412	100kg/cm²
Elongation at Break (min)	DIN 53504	200%	ASTM D412	200%
Compression Set (70^oC/24hrs/25% set) (max)	DIN 53517	50%	ASTM D395	50%
			Method B
Tear Resistance (Angular) (min)	DIN 53515	250lbs/inch	ASTM D624	45kg/cm
Change in Properties
Heat Ageing (72 hrs at 70^oC)			ASTM D573
– Hardness (Pts)		+2 (Max)		+2 (Max)
– Tensile Strength (%)		+5		5
– Elongation at Break (%)		±10		±10
Volume Swell: At 70^oC for 72 hrs/in			ASTM D471
IRM No.901		1%		1%
IRM No.902		5%		5%
IRM No.903		10%		10%
Polymer Content (Hydrogenated Chemical Resistance)		100%		100%
– Ozone		Excellent	ASTM D1149	Excellent
– Dilute Acids and Bases		Excellent		Excellent
– Concentrated Acids and Bases		Fair		Fair
– Oils		Excellent		Excellent
– Solvents		Good		Good
Temperature Range		-30^o to 150^oC		-30^o to 150^oC
Colour		Black		Black

Hydrogenated Nitrile Gasket

Gasket Shape

Circular Gasket/Washer Options

Solid Disc Options

Circular Gasket with Holes Options

Circular/Flange Gasket with Holes

Square/Rectangular Gasket

Solid Square/Rectangular

Square/Rectangular Gasket with Holes

Square/Rectangular, Square Centre with Holes

Square/Rectangular, Circular Centre

Square/Rectangular, Circular Centre with Holes

Flange Gasket

Custom Gasket

Thickness (mm)

Additional Information

File Upload

Quantity

Rubber Gaskets Quote Request

Cut Rubber Strips Quote Request

Cut Rubber Parts Quote Request