Free delivery on orders over £1200.00, all other orders have a fixed rate of £20.00 + VAT.
*Terms and conditions apply
If you would like to discuss this product, or you require a sample, please call 01702 560194. Alternatively, you can use our contact form.
*Terms and conditions apply
If you would like to discuss this product, or you require a sample, please call 01702 560194. Alternatively, you can use our contact form.
Please note: All cut material is non-returnable unless faulty as these are non-sellable and have been cut to specific requirements.
Hydrogenated Nitrile Strip
SKU: ST-Coru213
- REACH, RoHS, PAH and CE compliant
- For use with chemicals, oil, fluctuating temperatures
- Hydrogenated Nitrile: 70° shore
- View material – Coru213
Call for Price
Chemical Resistances
Brine, Calcium Chloride, Carbon Dioxide, Carbon Monoxide, Castor Oil, Corn Oil, Crude Oil, Diesel Oil, Fatty Acids, Gasoline, Glucose, Grease, Heptane, Hydraulic Fluid, Hydrogen Gas, Hydrogen Sulphide, Jet Fuels, Kerosene, Lard, Lime, Linoleic Acid, Linseed Oil, LPG, Lubricating Oils, Mineral Oil, Natural Gas, Neon Gas, Nitrogen, Oil Petroleum, Oleic Acid, Paraffin Wax, Pentane, Petroleum Oils, Pine Oil, Propane, Sea Water, Sewage, Steam, Sulfuric Acid, Toluene, Transformer Oil, Urea, Varnish
Technical Information
| PROPERTIES | TEST METHOD | VALUES | TESTED METHOD | VALUES |
| FPS UNITS | METRIC UNITS | |||
| Specific Gravity | DIN 53509 | 1.20 ± 0.05 | ASTM D297 | 1.20 ± 0.05 |
| Hardness | DIN 53505 | 70 ± 5 Sh A | ASTM D2240 | 70 ± 5 Sh A |
| Tensile Strength (min) | DIN 53504 | 1422 PSI | ASTM D412 | 100kg/cm2 |
| Elongation at Break (min) | DIN 53504 | 200% | ASTM D412 | 200% |
| Compression Set (70oC/24hrs/25% set) (max) | DIN 53517 | 50% | ASTM D395 | 50% |
| Method B | ||||
| Tear Resistance (Angular) (min) | DIN 53515 | 250lbs/inch | ASTM D624 | 45kg/cm |
| Change in Properties | ||||
| Heat Ageing (72 hrs at 70oC) | ASTM D573 | |||
| – Hardness (Pts) | +2 (Max) | +2 (Max) | ||
| – Tensile Strength (%) | +5 | 5 | ||
| – Elongation at Break (%) | ±10 | ±10 | ||
| Volume Swell: At 70oC for 72 hrs/in | ASTM D471 | |||
| IRM No.901 | 1% | 1% | ||
| IRM No.902 | 5% | 5% | ||
| IRM No.903 | 10% | 10% | ||
| Polymer Content (Hydrogenated Chemical Resistance) | 100% | 100% | ||
| – Ozone | Excellent | ASTM D1149 | Excellent | |
| – Dilute Acids and Bases | Excellent | Excellent | ||
| – Concentrated Acids and Bases | Fair | Fair | ||
| – Oils | Excellent | Excellent | ||
| – Solvents | Good | Good | ||
| Temperature Range | -30o to 150oC | -30o to 150oC | ||
| Colour | Black | Black |
| PROPERTIES | TEST METHOD | VALUES | TESTED METHOD | VALUES |
| FPS UNITS | METRIC UNITS | |||
| Specific Gravity | DIN 53509 | 1.20 ± 0.05 | ASTM D297 | 1.20 ± 0.05 |
| Hardness | DIN 53505 | 70 ± 5 Sh A | ASTM D2240 | 70 ± 5 Sh A |
| Tensile Strength (min) | DIN 53504 | 1422 PSI | ASTM D412 | 100kg/cm2 |
| Elongation at Break (min) | DIN 53504 | 200% | ASTM D412 | 200% |
| Compression Set (70oC/24hrs/25% set) (max) | DIN 53517 | 50% | ASTM D395 | 50% |
| Method B | ||||
| Tear Resistance (Angular) (min) | DIN 53515 | 250lbs/inch | ASTM D624 | 45kg/cm |
| Change in Properties | ||||
| Heat Ageing (72 hrs at 70oC) | ASTM D573 | |||
| – Hardness (Pts) | +2 (Max) | +2 (Max) | ||
| – Tensile Strength (%) | +5 | 5 | ||
| – Elongation at Break (%) | ±10 | ±10 | ||
| Volume Swell: At 70oC for 72 hrs/in | ASTM D471 | |||
| IRM No.901 | 1% | 1% | ||
| IRM No.902 | 5% | 5% | ||
| IRM No.903 | 10% | 10% | ||
| Polymer Content (Hydrogenated Chemical Resistance) | 100% | 100% | ||
| – Ozone | Excellent | ASTM D1149 | Excellent | |
| – Dilute Acids and Bases | Excellent | Excellent | ||
| – Concentrated Acids and Bases | Fair | Fair | ||
| – Oils | Excellent | Excellent | ||
| – Solvents | Good | Good | ||
| Temperature Range | -30o to 150oC | -30o to 150oC | ||
| Colour | Black | Black |