Free delivery on orders over £1200.00, all other orders have a fixed rate of £20.00 + VAT.
*Terms and conditions apply
If you would like to discuss this product, or you require a sample, please call 01702 560194. Alternatively, you can use our contact form.
*Terms and conditions apply
If you would like to discuss this product, or you require a sample, please call 01702 560194. Alternatively, you can use our contact form.
Please note: All cut material is non-returnable unless faulty as these are non-sellable and have been cut to specific requirements.
Blue Metal Detectable FDA Approved Silicone Strip
SKU: ST-Coru1442
- Approved to FDA 21 CFR 177.2600 – EU1935/2004 Compliant
- REACH, RoHS, PAH and CE compliant
- Metal Detectable Silicone: 60° Shore
- Blue – RAL 5026
- View material – Coru1442
Call for Price
Chemical Resistances
Acetic Acid, AdBlue, Brine, Calcium Chloride, Carbon Dioxide, Carbon Monoxide, Carbonic Acid, Sodium Hydroxide, Citric Acid, Formaldehyde, Glucose, Hydrogen Gas, Hydrogen Peroxide, Hydrogen Sulphide, Lime, Methyl Alcohol, Methanol, Neon Gas, Nitrogen, Ozone, Phosphoric Acid, Potassium Carbonate, Sea Water, Sewage, Sodium Peroxide, Steam, Transformer Oil, Urea, Vegetable Oil, Vinegar
Technical Information
| PROPERTIES | TEST METHOD | VALUES FPS UNITS | TEST METHOD | VALUES METRIC UNITS |
| SPECIFIC GRAVITY | DIN 53508 | 1.30 | ASTM D297 | 1.30 |
| HARDNESS | DIN 53505 | 60 ± 5 SH A | ASTM D2240 | 60 ± 5 SH A |
| TENSILE STRENGTH ( MIN ) | DIN 53504 | 853 PSI | ASTM D412 | 60 KG/CM2 |
| ELONGATION AT BREAK ( MIN ) | DIN 53504 | 300% | ASTM D412 | 300% |
| COMPRESSION SET (70º C/24 HRS/25% SET) (MAX) | DIN 53517 | 45% | ASTM D395 METHOD B | 45% |
| TEAR RESISTANCE ( ANGULAR ) MIN | DIN 53515 | 95 LBS/INCH | ASTM D624 | 17 KG/CM |
| POLYMER CONTENT (%) | 100 | |||
| CHANGE IN PROPERTIES | ||||
| HEAT AGEING ( 72 HRS. AT 100 ºC ) | ASTM D573 | |||
| — HARDNESS (PTS) | + 1 (MAX) | + 1 (MAX) | ||
| — TENSILE STRENGTH (%) | ±5 | ±5 | ||
| — ELONGATION AT BREAK (%) | ±5 | ±5 | ||
| VOLUME SWELL : AT 70º C FOR 72 HRS/IN | ASTM D 471 | |||
| IRM OIL NO.1 | NA | NA | ||
| IRM OIL NO.2 | NA | NA | ||
| IRM OIL NO.3 | NA | NA | ||
| CHEMICAL RESISTANCE | ||||
| — OZONE | EXCELLENT | ASTM D 1149 | EXCELLENT | |
| — DILUTE ACIDS AND BASES | FAIR | FAIR | ||
| — CONCENTRATED ACIDS AND BASES | FAIR | FAIR | ||
| — OILS | FAIR | FAIR | ||
| — SOLVENTS | FAIR | FAIR | ||
| TEMPERATURE RANGE | -60 º TO + 200º C | -60 º TO + 200º C | ||
| COLOUR | BLUE – RAL 5026 | BLUE – RAL 5026 | ||
| POLYMER CONTENT (%) | 100 |
Extraction Data Test Results
Test Name: Determination of Amount of Extractives
Method : With reference to US FDA 21 CFR 177.2600
For use in contact with aqueous food:
| EXTRACTANTS | TEST CONDITIONS | RESULT
(MG/INCH²) |
REPORTING LIMIT
(MG/INCH²) |
PERMISSIBLE LIMIT
(MG/INCH²) |
| Distilled Water | Reflux Temperature for 7 Hours | ND | 0.1 | 20 |
| Succeeding 2 Hours of extraction | ND | 0.1 | 1 | |
| Comment | – – | PASS | – – | – – |
For use in contact with fatty food
| EXTRACTANTS | TEST CONDITIONS | RESULT
(MG/INCH²) |
REPORTING LIMIT
(MG/INCH²) |
PERMISSIBLE LIMIT
(MG/INCH²) |
| n-Hexane | Reflux Temperature for 7 Hours | ND | 0.1 | 175 |
| Succeeding 2 Hours of extraction | ND | 0.1 | 4 | |
| Comment | – – | PASS | – – | – – |
Notes:
- mg/inch² = milligram per square inch
- ND = Not Detected
- Test Condition has been provided by client
| PROPERTIES | TEST METHOD | VALUES FPS UNITS | TEST METHOD | VALUES METRIC UNITS |
| SPECIFIC GRAVITY | DIN 53508 | 1.30 | ASTM D297 | 1.30 |
| HARDNESS | DIN 53505 | 60 ± 5 SH A | ASTM D2240 | 60 ± 5 SH A |
| TENSILE STRENGTH ( MIN ) | DIN 53504 | 853 PSI | ASTM D412 | 60 KG/CM2 |
| ELONGATION AT BREAK ( MIN ) | DIN 53504 | 300% | ASTM D412 | 300% |
| COMPRESSION SET (70º C/24 HRS/25% SET) (MAX) | DIN 53517 | 45% | ASTM D395 METHOD B | 45% |
| TEAR RESISTANCE ( ANGULAR ) MIN | DIN 53515 | 95 LBS/INCH | ASTM D624 | 17 KG/CM |
| POLYMER CONTENT (%) | 100 | |||
| CHANGE IN PROPERTIES | ||||
| HEAT AGEING ( 72 HRS. AT 100 ºC ) | ASTM D573 | |||
| — HARDNESS (PTS) | + 1 (MAX) | + 1 (MAX) | ||
| — TENSILE STRENGTH (%) | ±5 | ±5 | ||
| — ELONGATION AT BREAK (%) | ±5 | ±5 | ||
| VOLUME SWELL : AT 70º C FOR 72 HRS/IN | ASTM D 471 | |||
| IRM OIL NO.1 | NA | NA | ||
| IRM OIL NO.2 | NA | NA | ||
| IRM OIL NO.3 | NA | NA | ||
| CHEMICAL RESISTANCE | ||||
| — OZONE | EXCELLENT | ASTM D 1149 | EXCELLENT | |
| — DILUTE ACIDS AND BASES | FAIR | FAIR | ||
| — CONCENTRATED ACIDS AND BASES | FAIR | FAIR | ||
| — OILS | FAIR | FAIR | ||
| — SOLVENTS | FAIR | FAIR | ||
| TEMPERATURE RANGE | -60 º TO + 200º C | -60 º TO + 200º C | ||
| COLOUR | BLUE – RAL 5026 | BLUE – RAL 5026 | ||
| POLYMER CONTENT (%) | 100 |
Extraction Data Test Results
Test Name: Determination of Amount of Extractives
Method : With reference to US FDA 21 CFR 177.2600
For use in contact with aqueous food:
| EXTRACTANTS | TEST CONDITIONS | RESULT
(MG/INCH²) |
REPORTING LIMIT
(MG/INCH²) |
PERMISSIBLE LIMIT
(MG/INCH²) |
| Distilled Water | Reflux Temperature for 7 Hours | ND | 0.1 | 20 |
| Succeeding 2 Hours of extraction | ND | 0.1 | 1 | |
| Comment | – – | PASS | – – | – – |
For use in contact with fatty food
| EXTRACTANTS | TEST CONDITIONS | RESULT
(MG/INCH²) |
REPORTING LIMIT
(MG/INCH²) |
PERMISSIBLE LIMIT
(MG/INCH²) |
| n-Hexane | Reflux Temperature for 7 Hours | ND | 0.1 | 175 |
| Succeeding 2 Hours of extraction | ND | 0.1 | 4 | |
| Comment | – – | PASS | – – | – – |
Notes:
- mg/inch² = milligram per square inch
- ND = Not Detected
- Test Condition has been provided by client