Free delivery on orders over £1200.00, all other orders have a fixed rate of £20.00 + VAT.
*Terms and conditions apply
If you would like to discuss this product, or you require a sample, please call 01702 560194. Alternatively, you can use our contact form.
*Terms and conditions apply
If you would like to discuss this product, or you require a sample, please call 01702 560194. Alternatively, you can use our contact form.
Please note: All cut material is non-returnable unless faulty as these are non-sellable and have been cut to specific requirements.
White Super Soft High Abrasion-resistant FDA Approved NR Gasket
SKU: GSKT-Coru138
- Approved to FDA 21 CFR177-2600 and EU 1935/2004
- The ultimate rubber for high wear and abrasion resistance
- REACH, RoHS, PAH and CE compliant
- Super Soft Natural Rubber: 38° Shore
- White – RAL 9001
- View material – Coru138
Call for Price
You save (%)
Technical Information
| PROPERTIES | TEST METHOD | VALUES FPS UNITS | TEST METHOD | VALUES METRIC UNITS |
| SPECIFIC GRAVITY | DIN 53508 | 0.98 ± 0.05 | ASTM D297 | 0.98 ± 0.05 |
| HARDNESS | DIN 53505 | 38 ± 5 SH A | ASTM D2240 | 38 ± 5 SH A |
| TENSILE STRENGTH (KG/CM2) | DIN 53504 | 2986 PSI | ASTM D412 | 240 KG/CM2 |
| ELONGATION AT BREAK ( MIN ) | DIN 53504 | 810% | ASTM D412 | 810% |
| ABRASION RESISTANCE ( MAX ) | DIN 53516 | 80 MM3 | ASTM D5963 | 80 MM3 |
| COMPRESSION SET (70 ºC/24 HRS/25% SET) (MAX) | DIN 53517 | 15 % | ASTM D395 METHOD | 15 % |
| POLYMER CONTENT (%) | 100 | 100 | ||
| TEAR RESISTANCE ( ANGULAR ) MIN | DIN 53515 | 224 LBS/INCH | ASTM D624 | 40 KG/CM |
| RESILIENCE | 75% | 75% | ||
| CHANGE IN PROPERTIES | ||||
| HEAT AGEING ( 72 HRS. AT 70ºC ) | ASTM D573 | |||
| — HARDNESS (PTS) | + 3 (MAX) | + 3 (MAX) | ||
| — TENSILE STRENGTH (%) | +10 / – 15 | +10 / – 15 | ||
| — ELONGATION AT BREAK (%) | +10 / – 15 | +10 / – 15 | ||
| FOOD GRADE COMPLIANCE | US FDA 21 CFR 177.2600 | YES | YES | |
| CHEMICAL RESISTANCE | ||||
| — OZONE | FAIR | FAIR | ||
| — DILUTE ACIDS AND BASES | GOOD | GOOD | ||
| — CONCENTRATED ACIDS AND BASES | NOT RECOMMENDED | NOT RECOMMENDED | ||
| — OILS | NOT RECOMMENDED | NOT RECOMMENDED | ||
| — SOLVENTS | NOT RECOMMENDED | NOT RECOMMENDED | ||
| TEMPERATURE RANGE | -30º TO + 70º C | -30º TO + 70º C | ||
| COLOUR | WHITE – RAL 9001 | |||
| PROPERTIES | TEST METHOD | VALUES FPS UNITS | TEST METHOD | VALUES METRIC UNITS |
| SPECIFIC GRAVITY | DIN 53508 | 0.98 ± 0.05 | ASTM D297 | 0.98 ± 0.05 |
| HARDNESS | DIN 53505 | 38 ± 5 SH A | ASTM D2240 | 38 ± 5 SH A |
| TENSILE STRENGTH (KG/CM2) | DIN 53504 | 2986 PSI | ASTM D412 | 240 KG/CM2 |
| ELONGATION AT BREAK ( MIN ) | DIN 53504 | 810% | ASTM D412 | 810% |
| ABRASION RESISTANCE ( MAX ) | DIN 53516 | 80 MM3 | ASTM D5963 | 80 MM3 |
| COMPRESSION SET (70 ºC/24 HRS/25% SET) (MAX) | DIN 53517 | 15 % | ASTM D395 METHOD | 15 % |
| POLYMER CONTENT (%) | 100 | 100 | ||
| TEAR RESISTANCE ( ANGULAR ) MIN | DIN 53515 | 224 LBS/INCH | ASTM D624 | 40 KG/CM |
| RESILIENCE | 75% | 75% | ||
| CHANGE IN PROPERTIES | ||||
| HEAT AGEING ( 72 HRS. AT 70ºC ) | ASTM D573 | |||
| — HARDNESS (PTS) | + 3 (MAX) | + 3 (MAX) | ||
| — TENSILE STRENGTH (%) | +10 / – 15 | +10 / – 15 | ||
| — ELONGATION AT BREAK (%) | +10 / – 15 | +10 / – 15 | ||
| FOOD GRADE COMPLIANCE | US FDA 21 CFR 177.2600 | YES | YES | |
| CHEMICAL RESISTANCE | ||||
| — OZONE | FAIR | FAIR | ||
| — DILUTE ACIDS AND BASES | GOOD | GOOD | ||
| — CONCENTRATED ACIDS AND BASES | NOT RECOMMENDED | NOT RECOMMENDED | ||
| — OILS | NOT RECOMMENDED | NOT RECOMMENDED | ||
| — SOLVENTS | NOT RECOMMENDED | NOT RECOMMENDED | ||
| TEMPERATURE RANGE | -30º TO + 70º C | -30º TO + 70º C | ||
| COLOUR | WHITE – RAL 9001 | |||