*Terms and conditions apply
If you would like to discuss this product, or you require a sample, please call 01702 560194. Alternatively, you can use our contact form.
Please note: All cut material is non-returnable unless faulty as these are non-sellable and have been cut to specific requirements.
Pebble Finish PVC Runner Matting
- Safe & Hygienic & Non Toxic
- Oil & Grease Resistant
- Slip resistant multi-directional patterned surface
- Good floor to foot cold insulation properties
- Also available in bespoke cut parts
From £48.67 Excl. VAT
This product is available for bespoke manufacturing, please choose an option below:
Coru563 ‘Pebble Finish’ PVC Runner Matting is an attractive and economic grade of PVC matting with a pebble pattern design on one side and a plain, smooth reverse. Available in a choice of Black, Grey, Blue, Green, Red at 2.5mm stock thickness. Ideally suited for food preparation areas, communal areas, walkways, tread mats, runners and general purpose industrial applications where a multi directional tread pattern is required.
- Attractive low relief square studded pattern
- Clean & Hygienic
- Durable PVC compound
- Economically priced
- Cut lengths to order
This grade can be produced in varying width, length and thickness formats and in a variety of colours (RAL matched if needed) to special order. These would be subject to minimum batch run quantities, usually 200 M2 per size/colour.
|
Properties |
Values |
|
Colour |
Black, Grey, Blue, Green, Red |
|
Polymer |
PVC |
|
Density (Specific Gravity) |
1.70 |
|
Hardness oShore A |
75±5 |
|
Tensile Strength kg/cm2 |
80.0 |
|
Elongation at Break |
200% |
|
Abrasion Resistance |
250mm3 |
|
Temperature Resistance, MAX |
-20 to +100oC |
|
Properties |
Values |
|
Colour |
Black, Grey, Blue, Green, Red |
|
Polymer |
PVC |
|
Density (Specific Gravity) |
1.70 |
|
Hardness oShore A |
75±5 |
|
Tensile Strength kg/cm2 |
80.0 |
|
Elongation at Break |
200% |
|
Abrasion Resistance |
250mm3 |
|
Temperature Resistance, MAX |
-20 to +100oC |