Free delivery on orders over £1200.00, all other orders have a fixed rate of £20.00 + VAT.
*Terms and conditions apply
If you would like to discuss this product, or you require a sample, please call 01702 560194. Alternatively, you can use our contact form.
*Terms and conditions apply
If you would like to discuss this product, or you require a sample, please call 01702 560194. Alternatively, you can use our contact form.
Please note: All cut material is non-returnable unless faulty as these are non-sellable and have been cut to specific requirements.
Blue Metal Detectable Nitrile Sheet FDA Approved
SKU: Coru167
- Approved to: FDA 21 CFR 177.2600 – EU1935/2004 compliant
- 1.4m x 10m rolls
- Available in 1.5mm, 3mm, 5mm and 6mm thicknesses
- Blue – RAL 5026
Call for Price
This product is available for bespoke manufacturing, please choose an option below:
Chemical Resistances
Brine, Calcium Chloride, Carbon Dioxide, Carbon Monoxide, Castor Oil, Corn Oil, Crude Oil, Diesel Oil, Fatty Acids, Gasoline, Glucose, Grease, Heptane, Hydraulic Fluid, Hydrogen Gas, Hydrogen Sulphide, Jet Fuels, Kerosene, Lard, Lime, Linoleic Acid, Linseed Oil, LPG, Lubricating Oils, Mineral Oil, Natural Gas, Neon Gas, Nitrogen, Oil Petroleum, Oleic Acid, Paraffin Wax, Pentane, Petroleum Oils, Pine Oil, Propane, Sea Water, Sewage, Steam, Sulfuric Acid, Toluene, Transformer Oil, Urea, Varnish
Technical Information
| PROPERTIES | TEST METHOD | VALUES FPS UNITS | TEST METHOD | VALUES METRIC UNITS |
| SPECIFIC GRAVITY | DIN 53508 | 1.40 ± 0.05 | ASTM D297 | 1.40 ± 0.05 |
| HARDNESS | DIN 53505 | 60 ± 5 SH A | ASTM D2240 | 60 ± 5 SH A |
| TENSILE STRENGTH ( MIN ) | DIN 53504 | 995PSI | ASTM D412 | 70KG/CM2 |
| ELONGATION AT BREAK ( MIN ) | DIN 53504 | 350% | ASTM D412 | 350% |
| COMPRESSION SET (70ºC/24 HRS/25% SET) (MAX) | DIN 53517 | 25% | ASTM D395 METHOD B | 25% |
| TEAR RESISTANCE ( ANGULAR ) MIN | DIN 53515 | 165 LBS/INCH | ASTM D624 | 30 KG/CM |
| POLYMER CONTENT (Nitrile) | 100% | |||
| CHANGE IN PROPERTIES AFTER | ASTM D573 | |||
| HEAT AGEING ( 72 HRS. AT 70 ºC ) | ||||
| — HARDNESS (PTS) | + 5 (MAX) | + 5 (MAX) | ||
| — TENSILE STRENGTH (%) | + 10 / – 15 | + 10 / – 15 | ||
| — ELONGATION AT BREAK (%) | -0.5 | -0.5 | ||
| VOLUME SWELL : AT 70ºC FOR 72 HRS/IN | ASTM D 471 | |||
| IRM OIL NO.901 | -2% | -2% | ||
| IRM OIL NO.902 | 4% | 4% | ||
| IRM OIL NO.903 | 15% | 15% | ||
| CHEMICAL RESISTANCE | ||||
| — OZONE | FAIR | ASTM D 1149 | FAIR | |
| — DILUTE ACIDS AND BASES | GOOD | GOOD | ||
| — CONCENTRATED ACIDS AND BASES | NOT RECOMMENDED | NOT RECOMMENDED | ||
| — OILS | GOOD | GOOD | ||
| — SOLVENTS | FAIR | FAIR | ||
| TEMPERATURE RANGE | -35º TO + 110º C | -35º TO + 110º C | ||
| COLOUR | BLUE – RAL 5026 |
| PROPERTIES | TEST METHOD | VALUES FPS UNITS | TEST METHOD | VALUES METRIC UNITS |
| SPECIFIC GRAVITY | DIN 53508 | 1.40 ± 0.05 | ASTM D297 | 1.40 ± 0.05 |
| HARDNESS | DIN 53505 | 60 ± 5 SH A | ASTM D2240 | 60 ± 5 SH A |
| TENSILE STRENGTH ( MIN ) | DIN 53504 | 995PSI | ASTM D412 | 70KG/CM2 |
| ELONGATION AT BREAK ( MIN ) | DIN 53504 | 350% | ASTM D412 | 350% |
| COMPRESSION SET (70ºC/24 HRS/25% SET) (MAX) | DIN 53517 | 25% | ASTM D395 METHOD B | 25% |
| TEAR RESISTANCE ( ANGULAR ) MIN | DIN 53515 | 165 LBS/INCH | ASTM D624 | 30 KG/CM |
| POLYMER CONTENT (Nitrile) | 100% | |||
| CHANGE IN PROPERTIES AFTER | ASTM D573 | |||
| HEAT AGEING ( 72 HRS. AT 70 ºC ) | ||||
| — HARDNESS (PTS) | + 5 (MAX) | + 5 (MAX) | ||
| — TENSILE STRENGTH (%) | + 10 / – 15 | + 10 / – 15 | ||
| — ELONGATION AT BREAK (%) | -0.5 | -0.5 | ||
| VOLUME SWELL : AT 70ºC FOR 72 HRS/IN | ASTM D 471 | |||
| IRM OIL NO.901 | -2% | -2% | ||
| IRM OIL NO.902 | 4% | 4% | ||
| IRM OIL NO.903 | 15% | 15% | ||
| CHEMICAL RESISTANCE | ||||
| — OZONE | FAIR | ASTM D 1149 | FAIR | |
| — DILUTE ACIDS AND BASES | GOOD | GOOD | ||
| — CONCENTRATED ACIDS AND BASES | NOT RECOMMENDED | NOT RECOMMENDED | ||
| — OILS | GOOD | GOOD | ||
| — SOLVENTS | FAIR | FAIR | ||
| TEMPERATURE RANGE | -35º TO + 110º C | -35º TO + 110º C | ||
| COLOUR | BLUE – RAL 5026 |