*Terms and conditions apply
If you would like to discuss this product, or you require a sample, please call 01702 560194. Alternatively, you can use our contact form.
Please note: All cut material is non-returnable unless faulty as these are non-sellable and have been cut to specific requirements.
ER40 – EPDM / Neoprene Closed Cell Sponge Rubber
- Good chemical, ozone, oxidation, flame and weathering resistance
- Minimal liquid absorption due to closed cell construction
- Tested operation temperature between -40°C and +85ºC
- CFC and HFC free
From £5.39 Excl. VAT
This product is available for bespoke manufacturing, please choose an option below:
ER40 Plain EPDM / Neoprene Closed Cell Sponge Sheet
The CoruER40 is a closed cell EPDM / Neoprene blended sponge sheeting. Due to the blended nature of the product the CoruER40 exhibits good chemical, ozone, oxidation, Flame and weathering resistance. It has minimal liquid absorption due to its closed cell construction and a tested operation temperature of between -40°C and +85ºC. It also presents a low odour and good ageing resistance; it is not however recommended for use with Chlorinated Solvents or applications involving Oil and Fuel. Please contact us for more details.
The material is also fully able to be recycled as it is CFC and HFC Free.
N.B. Available in plain or self-adhesive backed tape (SAB) alternatives. Bespoke sheets and gaskets are available, as well as customised rubber strips. Email your enquiries to sales@coruba.co.uk.
Product Resistance characteristics
- Weather and Ozone protection – Good
- Oxidation – Excellent
- Ozone – Excellent
- Acid – Excellent
- Alkali – Excellent
- Aromatic Hydrocarbons – Fair
- Ketones – Fair
- Flame – Good
- Low Temperature – Good
- High Temperature – Good
- Ageing – Good
Although the above information is given as a guide, please contact us with your specific environmental requirements for the product, this is especially important with chemicals, liquids and applications with fluctuations in temperatures. The above information provided/obtained supplied in accordance with accepted test methods as above, all is given in good faith without warranty. All tests’ data are average values and should be considered as guideline on specification and suitability only, the end user must determine the suitability and of course material fulfils their intended application/requirement(s).
|
Properties |
Values |
|
Colour |
Black |
|
Compound |
EPDM/CR |
|
Density [Specific Gravity] |
120kg/m2 |
|
Hardness [Term] |
Medium |
|
Tensile Strength [Term] |
Low |
|
ASTM D1056 Specification [ or other ]: |
2A2, RE42, RE42E1 |
|
Temperature Range |
-40 to +100oC |
|
Cell Structure |
Closed |
|
Properties |
Values |
|
Colour |
Black |
|
Compound |
EPDM/CR |
|
Density [Specific Gravity] |
120kg/m2 |
|
Hardness [Term] |
Medium |
|
Tensile Strength [Term] |
Low |
|
ASTM D1056 Specification [ or other ]: |
2A2, RE42, RE42E1 |
|
Temperature Range |
-40 to +100oC |
|
Cell Structure |
Closed |