Coru146 - Coru Seal is a Black EPDM Rubber Roofing Membrane.
CORUSEAL EPDM RUBBER ROOFING MEMBRANE 1.5m WIDE x 1.15mm THICK - Choose your length (linear meters from 1m to 20m).
Easy to lay, with full instructions upon request, this is a high performing EPDM Rubber Roofing Membrane, based on the ASTM-D4637 technical specification.
CORUSEAL EPDM Roofing Membranehas a 100% EPDM polymer content, making it an ideal choice for water-proofing a wide variety of roofs around any domestic or industrial enviroment. CORUSEAL EPDM Roofing Membrane is lightweight and long-lasting, and features a high resistancy to ozone and weathering. With a wide range of sheet sizing options, you are sure to find a sheet size that suits your requirements, meaning less joins and an easier, quicker installation.
CORUSEAL EPDM Roofing Membrane is highly flexible, whilst still working well at temperatures of between -40 degrees C, upto 150 degrees C - plus CORUSEAL EPDM Roofing Membranehas has elongation properties of 300% at break!
This is a cheap and effective way of protecting your roof - with little or no ongoing maintenance needed!
N.B. Available in plain or self-adhesive backed tape (SAB) alternatives. Bespoke sheets and gaskets are available, as well as customised rubber strips. Email your enquiries to sales@coruba.co.uk.
PROPERTIES |
TEST METHOD |
VALUES FPS UNITS |
TEST METHOD |
VALUES METRIC UNITS |
COLOUR |
VISUAL |
BLACK |
|
BLACK |
DENSITY |
|
1.10 |
|
1.10 |
HARDNESS |
ASTM D 2240 |
65 ± 10 SH A |
DIN 53505 |
65 ± 10 SH A |
TENSILE STRENGTH ( MIN ) |
ASTM D 412 |
90KG/CM |
DIN 53504 |
1280.7 PSI |
ELONGATION AT BREAK ( MIN ) |
ASTM D 412 |
300% |
DIN 53504 |
300% |
ABRASION RESISTANCE ( MAX ) |
ASTM D5963 |
250 MM |
DIN 150 4649 |
250 MM |
POLYMER CONTENT (%) |
|
100 |
|
100 |
COMPRESSION SET (70 C/24 HRS) \(MAX) |
ASTM D395 METHOD B |
24% |
DIN 180 815 |
24% |
TEAR RESISTANCE (ANGULAR) MIN |
ASTM D624 METHOD C |
30 KG/CM |
DIN 53506 |
167.97 LBS/INCH |
RESISTANCE TO HEAT AGING |
|
|
|
|
PROPERTIES AFTER 166 HRS @ 115C |
ASTM D 573 |
|
|
|
TENSILE STRENGTH MIN. |
ASTM D 412 |
85KGS. /CM2 |
DIN 53505 |
1209.55 PSI |
ELONGATION ( % ) |
ASTM D 412 |
210 |
DIN 53504 |
210 |
LINEAR DIMENSIONAL CHANGE MAX. % |
ASTM D 1204 |
+/-1 |
|
|
BRITTLENESS TEMPERATURE C |
ASTM D 746 |
-45 |
|
|
RESISTANCE WATER ABSORPTION, AFTER 166HRS. ° IMMERSION @ 70 C |
|
|
|
|
% CHANGE IN MASS |
ASTM D 471 |
4.0 |
DIN ISO 1817 |
4.0 |
WATER VAPOR PERMEABILITY MAX. PER- MILLS |
ASTM E 96 |
3.5 |
|
|
TEMPERATURE RESISTANCE |
|
-30 TO +120°C |
Special Price | £5.21 |
---|---|
Insertion Req | No |
Material | EPDM |
Shore Hardness +/- 5º | 65 |
Download Document |
---|