*Terms and conditions apply
If you would like to discuss this product, or you require a sample, please call 01702 560194. Alternatively, you can use our contact form.
Please note: All cut material is non-returnable unless faulty as these are non-sellable and have been cut to specific requirements.
Anti-Vibration Mat Neoprene/SBR Blend Black 45 shore°
- Excellent Anti-Vibration qualities
- Long product life
- Good friction and anti-creeping
- Length: 500mm
- Width: 500mm
- Thickness: 10mm
£27.60 Incl. VAT£23.00 Excl. VAT
You save (%)
The Coru710 Black Anti-Vibration Mat 45 Shore° is a high-quality neoprene/SBR blend mat specially designed to isolate vibrations from a variety of machinery and applications. By evenly absorbing vibrations from under heavy machinery, these mats not only reduce vibration, but noise and irritation as well. In addition, the grip system holds machinery in place, stopping it from moving from their desired positions. Out of place machinery can not only be a nuisance, but a danger.
Launderettes, warehouses and conveyors are just a couple of uses and industries that this anti-vibration mat would fit perfectly in. You can even use it at home. Under a washing machine or dryer, the mat can minimise noise and damage to the floor, silencing that annoying rattle.

| PROPERTIES | TEST METHOD | VALUES
FPS UNITS |
TEST METHOD | VALUES
METRIC UNITS |
| SPECIFIC GRAVITY | 1.35 ± 0.05 | ASTM D297 | 1.35 ± 0.05 | |
| HARDNESS | ISO 48-4 | 45± 5 Sh A | ASTM D2240 | 45± 5 Sh A |
| TESNSILE STRENGTH ( min ) | ISO 37 | 711 PSI | ASTM D412 | 50 kg/cm2 |
| ELONGATION AT BREAK ( min ) | ISO 37 | 300% | ASTM D412 | 300% |
| TEAR RESISTANCE ( Angular ) min | ISO 34-1 | 123 Lbs/Inch | ASTM D624 | 22 Kg/cm |
| CHANGE IN PROPERTIES | ||||
| HEATING AGEING ( 72 hrs. AT 70°C ) | ASTM D573 | |||
| — HARDNESS (Pts) | + 5 (Max) | + 5 (Max) | ||
| — TENSILE STRENGTH (%) | + 10 / -25 | + 10 / -25 | ||
| — ELONGATION AT BREAK (%) | + 10 / -25 | + 10 / -25 | ||
| VOLUME SWELL: 70ºC for 72hrs | ASTM D471 | |||
| IN IRM OIL NO 901 | NOT RECOMMENDED |
NOT RECOMMENDED |
||
| IN IRM OIL NO 902 | NOT RECOMMENDED |
NOT RECOMMENDED |
||
| IN IRM OIL NO 903 | NOT RECOMMENDED |
NOT RECOMMENDED |
||
| CHEMICAL RESISTANCE | ||||
| — OZONE | ISO 1431-1 | NOT RECOMMENDED |
ASTM D 1149 | NOT RECOMMENDED |
| — DILUTE ACIDS AND BASES | NOT RECOMMENDED |
NOT RECOMMENDED |
||
| — CONCENTRATED ACIDS AND BASES |
NOT RECOMMENDED |
NOT RECOMMENDED |
||
| — OILS | NOT RECOMMENDED |
NOT RECOMMENDED |
||
| — SOLVENTS | NOT RECOMMENDED |
NOT RECOMMENDED |
||
| TEMPERATURE RANGE | -30º to + 70 ºC | -30º to + 70 ºC | ||
| COLOUR | BLACK | BLACK |
| PROPERTIES | TEST METHOD | VALUES
FPS UNITS |
TEST METHOD | VALUES
METRIC UNITS |
| SPECIFIC GRAVITY | 1.35 ± 0.05 | ASTM D297 | 1.35 ± 0.05 | |
| HARDNESS | ISO 48-4 | 45± 5 Sh A | ASTM D2240 | 45± 5 Sh A |
| TESNSILE STRENGTH ( min ) | ISO 37 | 711 PSI | ASTM D412 | 50 kg/cm2 |
| ELONGATION AT BREAK ( min ) | ISO 37 | 300% | ASTM D412 | 300% |
| TEAR RESISTANCE ( Angular ) min | ISO 34-1 | 123 Lbs/Inch | ASTM D624 | 22 Kg/cm |
| CHANGE IN PROPERTIES | ||||
| HEATING AGEING ( 72 hrs. AT 70°C ) | ASTM D573 | |||
| — HARDNESS (Pts) | + 5 (Max) | + 5 (Max) | ||
| — TENSILE STRENGTH (%) | + 10 / -25 | + 10 / -25 | ||
| — ELONGATION AT BREAK (%) | + 10 / -25 | + 10 / -25 | ||
| VOLUME SWELL: 70ºC for 72hrs | ASTM D471 | |||
| IN IRM OIL NO 901 | NOT RECOMMENDED |
NOT RECOMMENDED |
||
| IN IRM OIL NO 902 | NOT RECOMMENDED |
NOT RECOMMENDED |
||
| IN IRM OIL NO 903 | NOT RECOMMENDED |
NOT RECOMMENDED |
||
| CHEMICAL RESISTANCE | ||||
| — OZONE | ISO 1431-1 | NOT RECOMMENDED |
ASTM D 1149 | NOT RECOMMENDED |
| — DILUTE ACIDS AND BASES | NOT RECOMMENDED |
NOT RECOMMENDED |
||
| — CONCENTRATED ACIDS AND BASES |
NOT RECOMMENDED |
NOT RECOMMENDED |
||
| — OILS | NOT RECOMMENDED |
NOT RECOMMENDED |
||
| — SOLVENTS | NOT RECOMMENDED |
NOT RECOMMENDED |
||
| TEMPERATURE RANGE | -30º to + 70 ºC | -30º to + 70 ºC | ||
| COLOUR | BLACK | BLACK |


