*Terms and conditions apply
If you would like to discuss this product, or you require a sample, please call 01702 560194. Alternatively, you can use our contact form.
Please note: All cut material is non-returnable unless faulty as these are non-sellable and have been cut to specific requirements.
SM127 Black Commercial quality 2 ply EP80 Fabric Insertion SBR 70° is a Commercial grade commercial quality Styrene Butadiene rubber blend with an EP80 Fabric insertion. Due to the nature and economy of manufacture [an amount of RECLAIMED materials are blended with base polymer and fillers] minor surface deformations and blemishes may occur and materials may be more odorous than normal. Other grades, colours and finishes are available – subject to minimum batch quantities.
N.B. Coruba Sheeting can be supplied plain or with self-adhesive backed tape (SAB). Rubber Strip to bespoke sizes are available along with customised sheets/gaskets. Please email your enquiry details to sales@coruba.co.uk.
|
Properties |
Values |
|
Colour |
Black |
|
Compound |
SBR |
|
Density [Specific Gravity] |
1.60 |
|
Hardness [Degrees Shore A] |
85o ± 5 |
|
Tensile Strength [kg/cm2] |
40 |
|
Elongation At Break |
175% |
|
Temperature Range |
-20 to +70 oC |
|
Abrasion Resistance |
NA |
|
Insertion |
2 PLY EP80 FABRIC INSERTION |
|
Properties |
Values |
|
Colour |
Black |
|
Compound |
SBR |
|
Density [Specific Gravity] |
1.60 |
|
Hardness [Degrees Shore A] |
85o ± 5 |
|
Tensile Strength [kg/cm2] |
40 |
|
Elongation At Break |
175% |
|
Temperature Range |
-20 to +70 oC |
|
Abrasion Resistance |
NA |
|
Insertion |
2 PLY EP80 FABRIC INSERTION |