*Terms and conditions apply
If you would like to discuss this product, or you require a sample, please call 01702 560194. Alternatively, you can use our contact form.
Please note: All cut material is non-returnable unless faulty as these are non-sellable and have been cut to specific requirements.
3 PLY 10mm Thick EP500/3
- 3 Ply Belt
- 10mm Thick
- 500N/mm Tensile Strength
- Manufactured to DIN Y
- No minimum or maximum length
Call for Price
3 Ply EP500/3 – 5 + 1.5 DIN Y Conveyor belting from Coruba has 3 Polyester Fabric Reinforcements with a tensile strength of 500 N/mm. This belt has a 5mm hard wearing rubber top and a 1.5mm Bottom cover, manufactured to International standard DIN Y.
Available in the following widths: 1.5m, 1.2m, 0.75m, 0.6m
|
Properties |
Values |
|
Carcass |
|
|
The carcass is built up of 2 fabrics of polyester warp and polyamide weft: |
|
|
Tensile strength at break [N/mm]: |
200 |
|
Adhesion between plies [N/mm]: |
5 |
|
Thickness [mm]: |
3.3 |
|
Elongation at 10% TS nom [&]: |
MAX 1.5 |
|
Covers: |
|
|
Top cover thickness [mm]: |
5 |
|
Heat resistant, anti-static as per ISO284, SBR: |
|
|
Bottom cover thickness [mm]: |
1.5 |
|
Minimum adhesion between cover and carcass [N/mm]: |
5 |
|
Top: |
5 |
|
Bottom: |
4.5 |
|
Technical data of rubber covers: |
|
|
Tensile strength at break [MPa]: |
15mpa |
|
Elongation at break [%]: |
400% |
|
Abrasion resistance [mm³]: |
150 |
|
Max abrasion resistance [mm³]: |
150 |
|
Hardness, ±5º [ºShore A]: |
65±5 |
|
Belt characteristics: |
|
|
Belt width [mm]: Moulded Edges |
800 – 1800 ± 1% |
|
Belt width [mm]: Cut Edges |
500 – 1800 ± 1% |
|
Weight per m2 [kg/m2]: |
12.25kg/M2 |
|
Total thickness [mm]: |
10.0 |
|
Roll length [m]: |
To Customer Demand |
|
Roll diameter [m]: |
0.85 |
|
Roll weight [kg]: |
918.50 |
|
Properties |
Values |
|
Carcass |
|
|
The carcass is built up of 2 fabrics of polyester warp and polyamide weft: |
|
|
Tensile strength at break [N/mm]: |
200 |
|
Adhesion between plies [N/mm]: |
5 |
|
Thickness [mm]: |
3.3 |
|
Elongation at 10% TS nom [&]: |
MAX 1.5 |
|
Covers: |
|
|
Top cover thickness [mm]: |
5 |
|
Heat resistant, anti-static as per ISO284, SBR: |
|
|
Bottom cover thickness [mm]: |
1.5 |
|
Minimum adhesion between cover and carcass [N/mm]: |
5 |
|
Top: |
5 |
|
Bottom: |
4.5 |
|
Technical data of rubber covers: |
|
|
Tensile strength at break [MPa]: |
15mpa |
|
Elongation at break [%]: |
400% |
|
Abrasion resistance [mm³]: |
150 |
|
Max abrasion resistance [mm³]: |
150 |
|
Hardness, ±5º [ºShore A]: |
65±5 |
|
Belt characteristics: |
|
|
Belt width [mm]: Moulded Edges |
800 – 1800 ± 1% |
|
Belt width [mm]: Cut Edges |
500 – 1800 ± 1% |
|
Weight per m2 [kg/m2]: |
12.25kg/M2 |
|
Total thickness [mm]: |
10.0 |
|
Roll length [m]: |
To Customer Demand |
|
Roll diameter [m]: |
0.85 |
|
Roll weight [kg]: |
918.50 |