*Terms and conditions apply
If you would like to discuss this product, or you require a sample, please call 01702 560194. Alternatively, you can use our contact form.
Please note: All cut material is non-returnable unless faulty as these are non-sellable and have been cut to specific requirements.
Fine Ribbed Black Rubber Matting to IEC61111-2009 Class 0, 1000v Working / 10,000V tested
- REACH RoHS, PAH and CE Compliant
- PAH compliant means low Odour unlike cheaper grades
- Fully tested to specification
- Anti-slip finish
- Suitable Applications: Electrical Safety, General Purpose, Health & Safety
From £26.21 Excl. VAT
You save (%)
This product is available for bespoke manufacturing, please choose an option below:
Coruba are proud distributors of METROSEAL SM570-00 to IEC61111-2009 Class 0.
METROSEAL SM570-00 Fine Ribbed Black EPDM Rubber Matting to IEC61111-2009 Class 0, is a high quality electrical safety matting fully tested to 1,000 volts with regulation standard stamped on reverse of roll at 1000mm intervals. Maximum safety working voltage of 1,000v.
It has a fine ribbed, anti-slip surface pattern on one side and a cloth impression finish on the reverse.
Class 0
- Withstand Test:: 10kv – No Electrical Puncture
- Puncture Proof Test: – 5KV for 3 Minutes
- Working Voltage: – 1,000 volts
- Thickness: 3mm
- HALOGEN FREE
- Excellent resistance to acid/alkali
- Full test certificate supplied
- Health & Safety regulation material
- Fully traceable supply
- Regulatory branding on reverse
- Low maintenance
- Available 0.91m, 1.0m and 1.2m wide rolls
- THIS GRADE DOES NOT CONTAIN RECYCLED RUBBER
This Product is REACH, RoHS, PAH and CE Compliant
Due to the very high quality of METROSEAL raw materials the need for additional thickness is not necessary. The IEC:61111 specification only states ‘maximum’ thickness with minimum thickness being determined by suppliers’ ability to pass the correct tests defined in Clause 5 of specification. The above materials do so with the ‘integral’ layflat quality of the rubber compounds use not impaired in any way.
In addition to the above our thinner grades present less of a trip hazard when laid offering additional safety to operators. Standard finishes on this type are FINE RIBBED [corrugated] one side with an anti-creep impression on reverse.
MARKINGS
- The example marking on the underside of the mat will consist of a tag denoting details as right
- The brand shall be placed at 1000mm intervals along length of rolls
- The brand shall be colour coded as per IEC:61111:2009 guidelines
- Class ‘O’ – RED, Class ‘1’ – WHITE, Class ‘2’ – YELLOW, Class ‘3’ – GREEN, Class ‘4’ – ORANGE
- Cut lengths available to order
|
Clause No. |
Properties |
Specification |
|
|
– |
Specific Gravity |
1.50 ± 0.05 |
|
|
– |
Hardness, Shore A |
75 ± 5 |
|
|
– |
Tensile Strength, Kg/cm2 |
50 Min. |
|
|
– |
Elongation at Break, % |
200 Min. |
|
|
– |
Colour |
Black |
|
|
– |
Surface Finish |
Fine rib with fabric finish |
|
|
ELECTRICAL PROPERTIES |
|||
|
5.5 |
MECHANICAL TESTS |
|
|
|
5.5.2 |
Mechanical Puncture Test |
Min 70N |
|
|
5.5.3 |
Slip Resistance |
Avg. force higher than 50N |
|
|
5.6.2.2 |
Class |
Proof Test |
Withstand Test |
|
5.6.2.3 |
Class – 0 (Thickness 2.0 mm) |
5KV for 3 minutes |
10KV – No electrical puncture |
|
5.7 |
Ageing Test At 70 ± 2oC/168Hrs |
|
|
|
|
Mechanical Puncture Test |
Should be minimum 80% of original value |
|
|
5.8 |
Thermal Properties |
|
|
|
5.8.1 |
Flame Retardance |
Flame should not propagate within a 50mm diameter from the centre |
|
|
5.8.2 |
Low Temperature Resistance (4hr at -25 ± 3oC) |
|
|
|
|
a) Visual Inspection |
No cracks |
|
|
|
b) Voltage withstand |
No electrical puncture |
|
|
Clause No. |
Properties |
Specification |
|
|
– |
Specific Gravity |
1.50 ± 0.05 |
|
|
– |
Hardness, Shore A |
75 ± 5 |
|
|
– |
Tensile Strength, Kg/cm2 |
50 Min. |
|
|
– |
Elongation at Break, % |
200 Min. |
|
|
– |
Colour |
Black |
|
|
– |
Surface Finish |
Fine rib with fabric finish |
|
|
ELECTRICAL PROPERTIES |
|||
|
5.5 |
MECHANICAL TESTS |
|
|
|
5.5.2 |
Mechanical Puncture Test |
Min 70N |
|
|
5.5.3 |
Slip Resistance |
Avg. force higher than 50N |
|
|
5.6.2.2 |
Class |
Proof Test |
Withstand Test |
|
5.6.2.3 |
Class – 0 (Thickness 2.0 mm) |
5KV for 3 minutes |
10KV – No electrical puncture |
|
5.7 |
Ageing Test At 70 ± 2oC/168Hrs |
|
|
|
|
Mechanical Puncture Test |
Should be minimum 80% of original value |
|
|
5.8 |
Thermal Properties |
|
|
|
5.8.1 |
Flame Retardance |
Flame should not propagate within a 50mm diameter from the centre |
|
|
5.8.2 |
Low Temperature Resistance (4hr at -25 ± 3oC) |
|
|
|
|
a) Visual Inspection |
No cracks |
|
|
|
b) Voltage withstand |
No electrical puncture |
|