LinkedIn Tracking Transparent Silicone Rubber Sheet Grade 60° Shore | Coruba Skip to content
Transparent Silicone Rubber Sheet Grade 60° Shore
Translucent FDA Approved & EU1935/2004 Compliant Silicone 60° Shore
Translucent Silicone 60° Shore
Free delivery on orders over £1200.00, all other orders have a fixed rate of £20.00 + VAT.
*Terms and conditions apply

If you would like to discuss this product, or you require a sample, please call 01702 560194. Alternatively, you can use our contact form.

Please note: All cut material is non-returnable unless faulty as these are non-sellable and have been cut to specific requirements.

Download Translucent FDA Approved & EU1935/2004 Compliant Silicone 60° Shore Datasheet

Translucent FDA Approved & EU1935/2004 Compliant Silicone 60° Shore

SKU: Coru14304
View Chemical Resistances
View Chemical Resistances
  • Approved to FDA 21 CFR No; 177 – 2600 & EU1935/2004 regulations and USP Class V1 compliant
  • REACH, RoHS, PAH and CE compliant
  • High Quality, Food and Drink grade silicone: 60° Shore

From £36.72 Excl. VAT
You save (%)

Clear

This product is available for bespoke manufacturing, please choose an option below:

Gaskets

Strips

Cut Parts

Chemical Resistances

Acetic Acid, AdBlue, Brine, Calcium Chloride, Carbon Dioxide, Carbon Monoxide, Carbonic Acid, Sodium Hydroxide, Citric Acid, Formaldehyde, Glucose, Hydrogen Gas, Hydrogen Peroxide, Hydrogen Sulphide, Lime, Methyl Alcohol, Methanol, Neon Gas, Nitrogen, Ozone, Phosphoric Acid, Potassium Carbonate, Sea Water, Sewage, Sodium Peroxide, Steam, Transformer Oil, Urea, Vegetable Oil, Vinegar

The Coru14304 Translucent Silicone Food & Drink Grade 60° shore is high quality sheeting for demanding applications with excellent heat and flame resistance together with very good aging and weathering characteristics and suitable for use with food and drink.

N.B. Available in plain or self-adhesive backed tape (SAB) alternatives. Bespoke sheets and gaskets are available, as well as customised rubber strips. Email your enquiries to sales@coruba.co.uk.

Complies to US FDA 21 CFR177.2600. & EU 1935/2004 and USP Class VI Compliant.

Material Profile (see below):

  • Thickness: 1.0mm to 6mm
  • Sheet Size: 1.2m wide in 10m rolls
  • Finish: Smooth finish,
  • Cutting: Standard press-tools

This Product is REACH, RoHS, PAH and CE Compliant.

Other grades, colours and finishes are available – subject to minimum batch quantities.

FDA logo

PROPERTIES TEST METHOD VALUES FPS UNITS TEST METHOD VALUES METRIC UNITS
SPECIFIC GRAVITY DIN 53508 1.2±0.05 ASTM D297 1.2±0.05
HARDNESS DIN 53505 60 ± 5 SH A ASTM D2240 60 ± 5 SH A
TENSILE STRENGTH ( MIN ) DIN 53504 853 PSI ASTM D412 100 KG/CM2
ELONGATION AT BREAK ( MIN ) DIN 53504 250% ASTM D412 250%
COMPRESSION SET (70º C/24 HRS/25% SET) (MAX) DIN ISO 815-1 40% ASTM D395 METHOD B 40%
POLYMER CONTENT (%) 100 100
TEAR RESISTANCE ( ANGULAR ) MIN DIN 53515 112 LBS/INCH ASTM D624 20 KG/CM
CHANGE IN PROPERTIES
HEAT AGEING ( 72 HRS. AT 100 ºC ) ASTM D573
— HARDNESS (PTS) + 3 (MAX) + 3 (MAX)
— TENSILE STRENGTH (%) ±5 ±5
— ELONGATION AT BREAK (%) ±5 ±5
VOLUME SWELL : AT 70º C FOR 72 HRS/IN ASTM D 471
IRM OIL NO.1 + 5% + 5%
IRM OIL NO.2 + 7% + 7%
IRM OIL NO.3 + 25% + 25%
CHEMICAL RESISTANCE
— OZONE EXCELLENT ASTM D 1149 EXCELLENT
— DILUTE ACIDS AND BASES EXCELLENT EXCELLENT
— CONCENTRATED ACIDS AND BASES EXCELLENT EXCELLENT
— OILS GOOD GOOD
— SOLVENTS FAIR FAIR
TEMPERATURE RANGE -60 º TO + 225º C -60 º TO + 225º C
COLOUR TRANSLUCENT

 

(Test No. 1-i) Sensory verification of Odour/Smell

Test Specification(s)/Regulation(s): Regulation (EC) No. 1935/2004 & Council of Europe Resolution ResAP (2004) 5 on silicones to be used for food contact applications;

Test method adopted: DIN 10955:2004;

Simulant(s) used: Distilled Water;

Test Condition(s): 100°C or reflux for 4 hours.

COMPONENT NO. TEST PARAMETER RESULT (GRADE) COMPLIANCE REQUIREMENT/LIMIT MAX CONCLUSION (PASS/FAIL)
A Rating 1 Less than 2.5 Pass
Note:

(Intermediate grades are allowed)

0 = no perceptible difference in odour;

1 = just perceptible difference in odour (still difficult to define);

2 = slight difference in odour;

3 = marked difference in odour;

4 = strong difference in odour.

 

(Test No. 1-ii) Sensory verification of Taste

Test specification(s)/Regulation(s): Regulation (EC) No. 1935/2004 & Council of Europe Resolution ResAP (2004) 5 on silicones to be used for food contact applications;

Test method adopted: DIN 10955:2004;

Simulant(s) used: Distilled water

Test condition(s): 100°C or reflux for 4 hours.

COMPONENT NO. TEST PARAMETER RESULT (GRADE) COMPLIANCE REQUIREMENT/LIMIT MAX CONCLUSION (PASS/FAIL)
A Rating 0 Less than 2.5 Pass
Note:

(Intermediate grades are allowed)

0 = no perceptible difference in taste;

1 = just perceptible difference in taste (still difficult to define);

2 = slight difference in taste;

3= marked difference in taste;

4 = strong difference in taste.

 

(Test No. 2) Overall Migration

Test specification(s)/Regulation(s): Council of Europe Resolution ResAP (2004) 5 on silicones to be used for food contact applications;

Test method(s) adopted: With reference to EN 1186-3:2002 (for 3% acetic acid) &EN 1186-14:2002 (for 95% ethanol and iso-octane);

Simulant(s) used: Refer below;

Test Condition(s): Refer below (Note: Tests conducted under repeat conditions).

SR.NO SIMULANT USED TEST CONDITION(S) COMPONENT NO. RESULT (MG/DM²) COMPLIANCE REQUIREMENT/LIMIT MAX. (MG/DM²) CONCLUSION (PASS/FAIL)
1. 3% acetic acid 100°C or reflux for 4 hours A ND 10 Pass
2. 95% ethanol 60°C for 6 hours A ND 10 Pass
3. Iso-octane 60°C for 4 hours A ND 10 Pass
Overall Conclusion (Pass/Fail) Pass
Limited of Quantification: 2.0 mg/dm²
Note: (1) “mg/dm²” denotes milligram per square decimetre; (2) “°C” denotes degree Celsius; (3) “%” denotes percent; (4) “ND” denotes Not Detected.

 

(Test No. 3) Specific migration of formaldehyde (CAS No. 50-00-0)

Test specification(s)/Regulation(s): Council of Europe Resolution RedAP (2004) 5 on silicones to be used for food contact applications;

Test method(s) adopted: With reference to EN 13130-1:2004 followed by analysis as per DD CEN/TS 13130-23:2005;

Simulant(s) used: Refer below;

Test condition(s): Refer below (Note: Tests conducted under repeat use conditions).

SR.NO SIMULANT USED TEST CONDITION(S) COMPONENT NO. RESULT (MG/DM²) COMPLIANCE REQUIREMENT/LIMIT CONCLUSION (PASS/FAIL)
1. 3% acetic acid 100°C or reflux for 4 hours A ND 15 mg/kg Pass
2. 95% ethanol 60°C for 6 hours A ND 15 mg/kg Pass
3. Iso-octane 60°C for 4 hours A ND 15 mg/kg Pass
Overall Conclusion (Pass/Fail) Pass
Limited of Quantification: 10 mg/dm
Note: (1) “mg/dm²” denotes milligram per square decimetre; (2) “°C” denotes degree Celsius; (3) “%” denotes percent; (4) “ND” denotes Not Detected.

 

PROPERTIES TEST METHOD VALUES FPS UNITS TEST METHOD VALUES METRIC UNITS
SPECIFIC GRAVITY DIN 53508 1.2±0.05 ASTM D297 1.2±0.05
HARDNESS DIN 53505 60 ± 5 SH A ASTM D2240 60 ± 5 SH A
TENSILE STRENGTH ( MIN ) DIN 53504 853 PSI ASTM D412 100 KG/CM2
ELONGATION AT BREAK ( MIN ) DIN 53504 250% ASTM D412 250%
COMPRESSION SET (70º C/24 HRS/25% SET) (MAX) DIN ISO 815-1 40% ASTM D395 METHOD B 40%
POLYMER CONTENT (%) 100 100
TEAR RESISTANCE ( ANGULAR ) MIN DIN 53515 112 LBS/INCH ASTM D624 20 KG/CM
CHANGE IN PROPERTIES
HEAT AGEING ( 72 HRS. AT 100 ºC ) ASTM D573
— HARDNESS (PTS) + 3 (MAX) + 3 (MAX)
— TENSILE STRENGTH (%) ±5 ±5
— ELONGATION AT BREAK (%) ±5 ±5
VOLUME SWELL : AT 70º C FOR 72 HRS/IN ASTM D 471
IRM OIL NO.1 + 5% + 5%
IRM OIL NO.2 + 7% + 7%
IRM OIL NO.3 + 25% + 25%
CHEMICAL RESISTANCE
— OZONE EXCELLENT ASTM D 1149 EXCELLENT
— DILUTE ACIDS AND BASES EXCELLENT EXCELLENT
— CONCENTRATED ACIDS AND BASES EXCELLENT EXCELLENT
— OILS GOOD GOOD
— SOLVENTS FAIR FAIR
TEMPERATURE RANGE -60 º TO + 225º C -60 º TO + 225º C
COLOUR TRANSLUCENT

 

(Test No. 1-i) Sensory verification of Odour/Smell

Test Specification(s)/Regulation(s): Regulation (EC) No. 1935/2004 & Council of Europe Resolution ResAP (2004) 5 on silicones to be used for food contact applications;

Test method adopted: DIN 10955:2004;

Simulant(s) used: Distilled Water;

Test Condition(s): 100°C or reflux for 4 hours.

COMPONENT NO. TEST PARAMETER RESULT (GRADE) COMPLIANCE REQUIREMENT/LIMIT MAX CONCLUSION (PASS/FAIL)
A Rating 1 Less than 2.5 Pass
Note:

(Intermediate grades are allowed)

0 = no perceptible difference in odour;

1 = just perceptible difference in odour (still difficult to define);

2 = slight difference in odour;

3 = marked difference in odour;

4 = strong difference in odour.

 

(Test No. 1-ii) Sensory verification of Taste

Test specification(s)/Regulation(s): Regulation (EC) No. 1935/2004 & Council of Europe Resolution ResAP (2004) 5 on silicones to be used for food contact applications;

Test method adopted: DIN 10955:2004;

Simulant(s) used: Distilled water

Test condition(s): 100°C or reflux for 4 hours.

COMPONENT NO. TEST PARAMETER RESULT (GRADE) COMPLIANCE REQUIREMENT/LIMIT MAX CONCLUSION (PASS/FAIL)
A Rating 0 Less than 2.5 Pass
Note:

(Intermediate grades are allowed)

0 = no perceptible difference in taste;

1 = just perceptible difference in taste (still difficult to define);

2 = slight difference in taste;

3= marked difference in taste;

4 = strong difference in taste.

 

(Test No. 2) Overall Migration

Test specification(s)/Regulation(s): Council of Europe Resolution ResAP (2004) 5 on silicones to be used for food contact applications;

Test method(s) adopted: With reference to EN 1186-3:2002 (for 3% acetic acid) &EN 1186-14:2002 (for 95% ethanol and iso-octane);

Simulant(s) used: Refer below;

Test Condition(s): Refer below (Note: Tests conducted under repeat conditions).

SR.NO SIMULANT USED TEST CONDITION(S) COMPONENT NO. RESULT (MG/DM²) COMPLIANCE REQUIREMENT/LIMIT MAX. (MG/DM²) CONCLUSION (PASS/FAIL)
1. 3% acetic acid 100°C or reflux for 4 hours A ND 10 Pass
2. 95% ethanol 60°C for 6 hours A ND 10 Pass
3. Iso-octane 60°C for 4 hours A ND 10 Pass
Overall Conclusion (Pass/Fail) Pass
Limited of Quantification: 2.0 mg/dm²
Note: (1) “mg/dm²” denotes milligram per square decimetre; (2) “°C” denotes degree Celsius; (3) “%” denotes percent; (4) “ND” denotes Not Detected.

 

(Test No. 3) Specific migration of formaldehyde (CAS No. 50-00-0)

Test specification(s)/Regulation(s): Council of Europe Resolution RedAP (2004) 5 on silicones to be used for food contact applications;

Test method(s) adopted: With reference to EN 13130-1:2004 followed by analysis as per DD CEN/TS 13130-23:2005;

Simulant(s) used: Refer below;

Test condition(s): Refer below (Note: Tests conducted under repeat use conditions).

SR.NO SIMULANT USED TEST CONDITION(S) COMPONENT NO. RESULT (MG/DM²) COMPLIANCE REQUIREMENT/LIMIT CONCLUSION (PASS/FAIL)
1. 3% acetic acid 100°C or reflux for 4 hours A ND 15 mg/kg Pass
2. 95% ethanol 60°C for 6 hours A ND 15 mg/kg Pass
3. Iso-octane 60°C for 4 hours A ND 15 mg/kg Pass
Overall Conclusion (Pass/Fail) Pass
Limited of Quantification: 10 mg/dm
Note: (1) “mg/dm²” denotes milligram per square decimetre; (2) “°C” denotes degree Celsius; (3) “%” denotes percent; (4) “ND” denotes Not Detected.

 

Rubber Gaskets Quote Request
Cut Rubber Strips Quote Request
Cut Rubber Parts Quote Request