*Terms and conditions apply
If you would like to discuss this product, or you require a sample, please call 01702 560194. Alternatively, you can use our contact form.
Please note: All cut material is non-returnable unless faulty as these are non-sellable and have been cut to specific requirements.
Red Natural Rubber Medium – High Abrasion Grade 45° shore
- Meets ASTM D 2000 M2 AA412A13B13C12G21J1
- REACH, RoHS, PAH and CE compliant
- Medium to High abrasion resistance
- Natural Rubber: 45° Shore
- RED – RAL 3018
From £64.27 Excl. VAT
This product is available for bespoke manufacturing, please choose an option below:
Coru1320 Red Natural Rubber Medium – High Abrasion Grade 45° shore is a Medium to High Grade abrasion resistant polymeric sheeting for applications including shotblast, chute linings, conveyor skirts and wear strips with good resistance to dilute acids and alkalis.
N.B. Available in plain or self-adhesive backed tape (SAB) alternatives. Bespoke sheets and gaskets are available, as well as customised rubber strips. Email your enquiries to sales@coruba.co.uk.
The above sheeting is manufactured from top quality virgin materials and ingredients meeting high standard of performance.
Material Profile (see below):
- Thickness: 3mm to 25mm
- Sheet Size: 1.4m wide in 10m rolls
- Finish: Smooth finish
- Cutting: Standard press-tools
Other grades, colours and finishes are available – subject to minimum batch quantities.
This Product is REACH, RoHS, PAH and CE Compliant.
|
PROPERTIES |
TEST METHOD |
VALUES FPS UNITS |
TEST METHOD |
VALUES METRIC UNITS |
|
SPECIFIC GRAVITY |
DIN 53508 |
1.2 ±0.05 |
ASTM D297 |
1.2 ±0.05 |
|
HARDNESS |
DIN 53505 |
45 ± 5 SH A |
ASTM D2240 |
45 ± 5 SH A |
|
TENSILE STRENGTH ( MIN ) |
DIN 53504 |
1425 PSI |
ASTM D412 |
100 KG/CM2 |
|
ELONGATION AT BREAK ( MIN ) |
DIN 53504 |
400% |
ASTM D412 |
400% |
|
ABRASION RESISTANCE ( MAX ) |
DIN 53516 |
150 MM3 |
ASTM D5963 |
150 MM3 |
|
COMPRESSION SET (70ºC/24 HRS/25% COMPRESSION) (MAX) |
DIN 53517 |
35% |
ASTM D395 METHOD B |
35% |
|
TEAR RESISTANCE ( ANGULAR ) MIN |
DIN 53515 |
140 LBS/INCH |
ASTM D624 |
25 KG/CM |
|
CHANGE IN PROPERTIES AFTER |
|
|
|
|
|
HEAT AGEING FOR ( 72 HRS. AT 70 ºC ) |
|
|
ASTM D573 |
|
|
— HARDNESS (PTS) |
|
+ 5 (MAX) |
|
+ 5 (MAX) |
|
— TENSILE STRENGTH (%) |
|
+ 10 / – 20 |
|
+ 10 / – 20 |
|
— ELONGATION AT BREAK (%) |
|
+ 10 / – 20 |
|
+ 10 / – 20 |
|
VOLUME SWELL : AT 70ºC FOR 72 HRS |
|
|
ASTM D 471 |
|
|
IN IRM OIL NO.1 |
|
NOT RECOMMENDED |
|
NOT RECOMMENDED |
|
IN IRM OIL NO.2 |
|
NOT RECOMMENDED |
|
NOT RECOMMENDED |
|
IN IRM OIL NO.3 |
|
NOT RECOMMENDED |
|
NOT RECOMMENDED |
|
CHEMICAL RESISTANCE |
|
|
|
|
|
— OZONE |
|
FAIR |
ASTM D 1149 |
FAIR |
|
— DILUTE ACIDS AND BASES |
|
FAIR |
|
FAIR |
|
— CONCENTRATED ACIDS AND BASES |
|
NOT RECOMMENDED |
|
NOT RECOMMENDED |
|
— OILS |
|
NOT RECOMMENDED |
|
NOT RECOMMENDED |
|
— SOLVENTS |
|
NOT RECOMMENDED |
|
NOT RECOMMENDED |
|
TEMPERATURE RANGE |
|
-25º TO + 70º C |
|
-25º TO + 70º C |
|
COLOUR |
|
RED – RAL 3018 |
|
|
|
PROPERTIES |
TEST METHOD |
VALUES FPS UNITS |
TEST METHOD |
VALUES METRIC UNITS |
|
SPECIFIC GRAVITY |
DIN 53508 |
1.2 ±0.05 |
ASTM D297 |
1.2 ±0.05 |
|
HARDNESS |
DIN 53505 |
45 ± 5 SH A |
ASTM D2240 |
45 ± 5 SH A |
|
TENSILE STRENGTH ( MIN ) |
DIN 53504 |
1425 PSI |
ASTM D412 |
100 KG/CM2 |
|
ELONGATION AT BREAK ( MIN ) |
DIN 53504 |
400% |
ASTM D412 |
400% |
|
ABRASION RESISTANCE ( MAX ) |
DIN 53516 |
150 MM3 |
ASTM D5963 |
150 MM3 |
|
COMPRESSION SET (70ºC/24 HRS/25% COMPRESSION) (MAX) |
DIN 53517 |
35% |
ASTM D395 METHOD B |
35% |
|
TEAR RESISTANCE ( ANGULAR ) MIN |
DIN 53515 |
140 LBS/INCH |
ASTM D624 |
25 KG/CM |
|
CHANGE IN PROPERTIES AFTER |
|
|
|
|
|
HEAT AGEING FOR ( 72 HRS. AT 70 ºC ) |
|
|
ASTM D573 |
|
|
— HARDNESS (PTS) |
|
+ 5 (MAX) |
|
+ 5 (MAX) |
|
— TENSILE STRENGTH (%) |
|
+ 10 / – 20 |
|
+ 10 / – 20 |
|
— ELONGATION AT BREAK (%) |
|
+ 10 / – 20 |
|
+ 10 / – 20 |
|
VOLUME SWELL : AT 70ºC FOR 72 HRS |
|
|
ASTM D 471 |
|
|
IN IRM OIL NO.1 |
|
NOT RECOMMENDED |
|
NOT RECOMMENDED |
|
IN IRM OIL NO.2 |
|
NOT RECOMMENDED |
|
NOT RECOMMENDED |
|
IN IRM OIL NO.3 |
|
NOT RECOMMENDED |
|
NOT RECOMMENDED |
|
CHEMICAL RESISTANCE |
|
|
|
|
|
— OZONE |
|
FAIR |
ASTM D 1149 |
FAIR |
|
— DILUTE ACIDS AND BASES |
|
FAIR |
|
FAIR |
|
— CONCENTRATED ACIDS AND BASES |
|
NOT RECOMMENDED |
|
NOT RECOMMENDED |
|
— OILS |
|
NOT RECOMMENDED |
|
NOT RECOMMENDED |
|
— SOLVENTS |
|
NOT RECOMMENDED |
|
NOT RECOMMENDED |
|
TEMPERATURE RANGE |
|
-25º TO + 70º C |
|
-25º TO + 70º C |
|
COLOUR |
|
RED – RAL 3018 |
|
|