*Terms and conditions apply
If you would like to discuss this product, or you require a sample, please call 01702 560194. Alternatively, you can use our contact form.
Please note: All cut material is non-returnable unless faulty as these are non-sellable and have been cut to specific requirements.
Black Medium grade EPDM / SBR Rubber 60° shore
- Meets ASTM D 2000 M2 DA606A26B36G21
- REACH, RoHS, PAH and CE compliant
- For use in medium range applications
- Commercial Grade NR/EPDM rubber blend: 60° Shore
From £17.76 Excl. VAT
This product is available for bespoke manufacturing, please choose an option below:
Coru117 Black Medium grade EPDM / SBR Rubber 60° shore suitable for use in medium range applications such as low pressure pipe seals, man-way gaskets, weather strip.
N.B. Available in plain or self-adhesive backed tape (SAB) alternatives. Bespoke sheets and gaskets are available, as well as customised rubber strips. Email your enquiries to sales@coruba.co.uk.
Material Profile (See Below):
- Thickness: 1mm to 20mm
- Sheet Size: 1.4m wide in 5m and 10m rolls
- Finish: Smooth finish,
- Cutting: Standard press-tools
Other grades, colours and finishes are available – subject to minimum batch quantities.
|
PROPERTIES |
TEST METHOD |
VALUES FPS UNITS |
TEST METHOD |
VALUES METRIC UNITS |
|
SPECIFIC GRAVITY |
DIN 53508 |
1.35 ± 0.05 |
ASTM D297 |
1.35 ± 0.05 |
|
HARDNESS |
DIN 53505 |
60 ± 5 SH A |
ASTM D2240 |
60 ± 5 SH A |
|
TENSILE STRENGTH (KG/CM2) |
DIN 53504 |
711 PSI |
ASTM D412 |
60 KG/CM2 |
|
ELONGATION AT BREAK ( MIN ) |
DIN 53504 |
300% |
ASTM D412 |
300% |
|
COMPRESSION SET (70 ºC/24 HRS/25% SET) (MAX) |
DIN 53517 |
35% |
ASTM D395 METHOD B |
35% |
|
TEAR RESISTANCE ( ANGULAR ) MIN |
DIN 53515 |
101 LBS/INCH |
ASTM D624 |
18 KG/CM |
|
CHANGE IN PROPERTIES |
|
|
|
|
|
HEAT AGEING ( 72 HRS. AT 70 ºC) |
|
|
ASTM D573 |
|
|
— HARDNESS (PTS) |
|
+ 3 (MAX) |
|
+ 3 (MAX) |
|
— TENSILE STRENGTH (%) |
|
+10 / – 15 |
|
+10 / – 15 |
|
— ELONGATION AT BREAK (%) |
|
+10 / – 15 |
|
+10 / – 15 |
|
VOLUME SWELL : AT 70º C FOR 72 HRS/IN |
|
|
ASTM D 471 |
|
|
IRM OIL NO.1 |
|
NOT RECOMMENDED |
|
NOT RECOMMENDED |
|
IRM OIL NO.2 |
|
NOT RECOMMENDED |
|
NOT RECOMMENDED |
|
IRM OIL NO.3 |
|
NOT RECOMMENDED |
|
NOT RECOMMENDED |
|
POLYMER CONTENT (EPDM) |
|
30% |
|
30% |
|
CHEMICAL RESISTANCE |
|
|
|
|
|
— OZONE |
|
GOOD |
|
GOOD |
|
— DILUTE ACIDS AND BASES |
|
GOOD |
|
GOOD |
|
— CONCENTRATED ACIDS AND BASES |
|
FAIR |
|
FAIR |
|
— OILS |
|
NOT RECOMMENDED |
|
NOT RECOMMENDED |
|
— SOLVENTS |
|
NOT RECOMMENDED |
|
NOT RECOMMENDED |
|
TEMPERATURE RANGE |
|
-30 º TO +100º C |
|
-30 º TO +100º C |
|
Colour |
|
BLACK |
||
|
PROPERTIES |
TEST METHOD |
VALUES FPS UNITS |
TEST METHOD |
VALUES METRIC UNITS |
|
SPECIFIC GRAVITY |
DIN 53508 |
1.35 ± 0.05 |
ASTM D297 |
1.35 ± 0.05 |
|
HARDNESS |
DIN 53505 |
60 ± 5 SH A |
ASTM D2240 |
60 ± 5 SH A |
|
TENSILE STRENGTH (KG/CM2) |
DIN 53504 |
711 PSI |
ASTM D412 |
60 KG/CM2 |
|
ELONGATION AT BREAK ( MIN ) |
DIN 53504 |
300% |
ASTM D412 |
300% |
|
COMPRESSION SET (70 ºC/24 HRS/25% SET) (MAX) |
DIN 53517 |
35% |
ASTM D395 METHOD B |
35% |
|
TEAR RESISTANCE ( ANGULAR ) MIN |
DIN 53515 |
101 LBS/INCH |
ASTM D624 |
18 KG/CM |
|
CHANGE IN PROPERTIES |
|
|
|
|
|
HEAT AGEING ( 72 HRS. AT 70 ºC) |
|
|
ASTM D573 |
|
|
— HARDNESS (PTS) |
|
+ 3 (MAX) |
|
+ 3 (MAX) |
|
— TENSILE STRENGTH (%) |
|
+10 / – 15 |
|
+10 / – 15 |
|
— ELONGATION AT BREAK (%) |
|
+10 / – 15 |
|
+10 / – 15 |
|
VOLUME SWELL : AT 70º C FOR 72 HRS/IN |
|
|
ASTM D 471 |
|
|
IRM OIL NO.1 |
|
NOT RECOMMENDED |
|
NOT RECOMMENDED |
|
IRM OIL NO.2 |
|
NOT RECOMMENDED |
|
NOT RECOMMENDED |
|
IRM OIL NO.3 |
|
NOT RECOMMENDED |
|
NOT RECOMMENDED |
|
POLYMER CONTENT (EPDM) |
|
30% |
|
30% |
|
CHEMICAL RESISTANCE |
|
|
|
|
|
— OZONE |
|
GOOD |
|
GOOD |
|
— DILUTE ACIDS AND BASES |
|
GOOD |
|
GOOD |
|
— CONCENTRATED ACIDS AND BASES |
|
FAIR |
|
FAIR |
|
— OILS |
|
NOT RECOMMENDED |
|
NOT RECOMMENDED |
|
— SOLVENTS |
|
NOT RECOMMENDED |
|
NOT RECOMMENDED |
|
TEMPERATURE RANGE |
|
-30 º TO +100º C |
|
-30 º TO +100º C |
|
Colour |
|
BLACK |
||