*Terms and conditions apply
If you would like to discuss this product, or you require a sample, please call 01702 560194. Alternatively, you can use our contact form.
Please note: All cut material is non-returnable unless faulty as these are non-sellable and have been cut to specific requirements.
The Coru598 ‘Rope Affect’ Rubber Runner Matting is a general purpose rubber matting with the high relief ‘Rope Affect’ pattern design on one side and a cloth impression pattern on the reverse. Available in 3mm thickness. Ideally suited for walkways, tread mats, runners and general purpose industrial applications where a multi directional tread pattern is required.
- Neat, attractive pattern
- Low maintenance
- Cut lengths to order
This grade can be produced in varying width, length and thickness formats and in a variety of colours to special order. These would be subject to minimum batch run quantities, usually 500 M2 per size/colour.
|
Properties |
Values |
|
Colour |
Black |
|
Compound |
NR/SBR |
|
Density (Specific Gravity) |
1.50 |
|
Hardness oShore A |
70±5 |
|
Tensile Strength kg/cm2 |
30.0 |
|
Elongation at Break |
200% |
|
Abrasion Resistance |
250mm3 |
|
Temperature Resistance, MAX |
-30 to +70oC |
|
Properties |
Values |
|
Colour |
Black |
|
Compound |
NR/SBR |
|
Density (Specific Gravity) |
1.50 |
|
Hardness oShore A |
70±5 |
|
Tensile Strength kg/cm2 |
30.0 |
|
Elongation at Break |
200% |
|
Abrasion Resistance |
250mm3 |
|
Temperature Resistance, MAX |
-30 to +70oC |