Free delivery on orders over £1200.00, all other orders have a fixed rate of £20.00 + VAT.
*Terms and conditions apply
If you would like to discuss this product, or you require a sample, please call 01702 560194. Alternatively, you can use our contact form.
*Terms and conditions apply
If you would like to discuss this product, or you require a sample, please call 01702 560194. Alternatively, you can use our contact form.
Please note: All cut material is non-returnable unless faulty as these are non-sellable and have been cut to specific requirements.
Blue Metal Detectable EPDM Gasket
SKU: GSKT-Coru164
- Metal Detectable EPDM, FDA Approved to FDA 21 CFR 177.2600
- 60° shore hardness
- EU1934/2004 compliant
- BS6104, CE, PAH, RoHS & REACH compliant
- Blue – RAL 5026
- View material – Coru164
Call for Price
You save (%)
Chemical Resistances
Acetic Acid, AdBlue, Brake Fluid, Brine, Calcium Chloride, Carbon Dioxide, Carbon Monoxide, Carbonic Acid, Caustic Soda, Sodium Hydroxide, Citric Acid, Formaldehyde, Glucose, Hydrochloric Acid, Hydrofluoric Acid, Hydrogen Gas, Hydrogen Peroxide, Hydrogen Sulphide, Iodine, Lime, Methyl Alcohol, Methanol, Neon Gas, Nitic Acid, Nitrogen, Ozone, Phosphoric Acid, Potassium Carbonate, Sea Water, Sewage, Sodium Chloride, Sodium Peroxide, Steam, Sulfur, Sulfuric Acid, Urea, Uric Acid, Vegetable Oil, Vinegar
Technical Information
| PROPERTIES | TEST METHOD | VALUES FPS UNITS | TEST METHOD | VALUES METRIC UNITS |
| SPECIFIC GRAVITY | DIN 53508 | 1.30 ± 0.05 | ASTM D297 | 1.30 ± 0.05 |
| HARDNESS | DIN 53505 | 60 ± 5 SH A | ASTM D2240 | 60 ± 5 SH A |
| TENSILE STRENGTH ( MIN ) | DIN 53504 | 711PSI | ASTM D412 | 50KG/CM2 |
| ELONGATION AT BREAK ( MIN ) | DIN 53504 | 300% | ASTM D412 | 300% |
| COMPRESSION SET (70ºC/24 HRS/25% SET) (MAX) | DIN 53517 | 40% | ASTM D395 METHOD B | 40% |
| TEAR RESISTANCE ( ANGULAR ) MIN | DIN 53515 | 101 LBS/INCH | ASTM D624 | 18 KG/CM |
| POLYMER CONTENT (%) | 100% | |||
| CHANGE IN PROPERTIES AFTER | ASTM D573 | |||
| HEAT AGEING ( 72 HRS. AT 70 ºC ) | ||||
| — HARDNESS (PTS) | + 5 (MAX) | + 5 (MAX) | ||
| — TENSILE STRENGTH (%) | +10 / – 10 | +10 / – 10 | ||
| — ELONGATION AT BREAK (%) | +10 / – 20 | +10 / – 20 | ||
| VOLUME SWELL : AT 70ºC FOR 72 HRS/IN | ASTM D 471 | |||
| IRM OIL NO.901 | NOT RECOMMENDED | NOT RECOMMENDED | ||
| IRM OIL NO.902 | NOT RECOMMENDED | NOT RECOMMENDED | ||
| IRM OIL NO.903 | NOT RECOMMENDED | NOT RECOMMENDED | ||
| CHEMICAL RESISTANCE | ||||
| — OZONE | VERY GOOD | ASTM D 1149 | VERY GOOD | |
| — DILUTE ACIDS AND BASES | VERY GOOD | VERY GOOD | ||
| — CONCENTRATED ACIDS AND BASES | GOOD | GOOD | ||
| — OILS | NOT RECOMMENDED | NOT RECOMMENDED | ||
| — SOLVENTS | NOT RECOMMENDED | NOT RECOMMENDED | ||
| TEMPERATURE RANGE | -25º TO + 140º C | -25º TO + 140º C | ||
| COLOUR | BLUE – RAL 5026 | |||
| Metal Detectable | Pass | |||
| PROPERTIES | TEST METHOD | VALUES FPS UNITS | TEST METHOD | VALUES METRIC UNITS |
| SPECIFIC GRAVITY | DIN 53508 | 1.30 ± 0.05 | ASTM D297 | 1.30 ± 0.05 |
| HARDNESS | DIN 53505 | 60 ± 5 SH A | ASTM D2240 | 60 ± 5 SH A |
| TENSILE STRENGTH ( MIN ) | DIN 53504 | 711PSI | ASTM D412 | 50KG/CM2 |
| ELONGATION AT BREAK ( MIN ) | DIN 53504 | 300% | ASTM D412 | 300% |
| COMPRESSION SET (70ºC/24 HRS/25% SET) (MAX) | DIN 53517 | 40% | ASTM D395 METHOD B | 40% |
| TEAR RESISTANCE ( ANGULAR ) MIN | DIN 53515 | 101 LBS/INCH | ASTM D624 | 18 KG/CM |
| POLYMER CONTENT (%) | 100% | |||
| CHANGE IN PROPERTIES AFTER | ASTM D573 | |||
| HEAT AGEING ( 72 HRS. AT 70 ºC ) | ||||
| — HARDNESS (PTS) | + 5 (MAX) | + 5 (MAX) | ||
| — TENSILE STRENGTH (%) | +10 / – 10 | +10 / – 10 | ||
| — ELONGATION AT BREAK (%) | +10 / – 20 | +10 / – 20 | ||
| VOLUME SWELL : AT 70ºC FOR 72 HRS/IN | ASTM D 471 | |||
| IRM OIL NO.901 | NOT RECOMMENDED | NOT RECOMMENDED | ||
| IRM OIL NO.902 | NOT RECOMMENDED | NOT RECOMMENDED | ||
| IRM OIL NO.903 | NOT RECOMMENDED | NOT RECOMMENDED | ||
| CHEMICAL RESISTANCE | ||||
| — OZONE | VERY GOOD | ASTM D 1149 | VERY GOOD | |
| — DILUTE ACIDS AND BASES | VERY GOOD | VERY GOOD | ||
| — CONCENTRATED ACIDS AND BASES | GOOD | GOOD | ||
| — OILS | NOT RECOMMENDED | NOT RECOMMENDED | ||
| — SOLVENTS | NOT RECOMMENDED | NOT RECOMMENDED | ||
| TEMPERATURE RANGE | -25º TO + 140º C | -25º TO + 140º C | ||
| COLOUR | BLUE – RAL 5026 | |||
| Metal Detectable | Pass | |||