Free delivery on orders over £1200.00, all other orders have a fixed rate of £20.00 + VAT.
*Terms and conditions apply
If you would like to discuss this product, or you require a sample, please call 01702 560194. Alternatively, you can use our contact form.
*Terms and conditions apply
If you would like to discuss this product, or you require a sample, please call 01702 560194. Alternatively, you can use our contact form.
Please note: All cut material is non-returnable unless faulty as these are non-sellable and have been cut to specific requirements.
FMVSS 302 Black Natural Flame Resistant Rubber – 65º Shore
SKU: Coru186
- FMVSS 302 Fire Rated
- 65º Shore hardness
Call for Price
Motor Vehicle Safety Standard (FMVSS) 302 sets requirements for flammability resistance in vehicle interior materials, including rubber sheeting. Compliant rubber sheets must meet specific fire safety standards to minimize the risk of ignition and contribute to overall vehicle safety. Adherence to FMVSS 302 ensures that these materials enhance passenger protection in automobiles.
Technical Information
| PROPERTIES | TEST METHOD | VALUES FPS UNITS | TEST METHOD | VALUES METRIC UNITS |
| SPECIFIC GRAVITY | DIN 53508 | 1.50 +- 0.05 | ASTM D297 | 1.50 +- 0.05 |
| HARDNESS | DIN 53505 | 65 ± 5 SH A | ASTM D2240 | 65 ± 5 SH A |
| TENSILE STRENGTH ( MIN ) | DIN 53504 | 497 PSI | ASTM D412 | 35 KG/CM2 |
| ELONGATION AT BREAK ( MIN ) | DIN 53504 | 250% | ASTM D412 | 250% |
| COMPRESSION SET (70 ºC/24 HRS/25% COMPRESSION) (MAX) | DIN 53517 | 30% | ASTM D395 METHOD B | 30% |
| CHANGE IN PROPERTIES AFTER | ||||
| HEAT AGEING ( 72 HRS. AT 70 ºC ) | ASTM D573 | |||
| — HARDNESS (PTS) | + 5 (MAX) | + 5 (MAX) | ||
| — TENSILE STRENGTH (%) | + 10 / – 25 | + 10 / – 25 | ||
| — ELONGATION AT BREAK (%) | + 10 / – 25 | + 10 / – 25 | ||
| VOLUME SWELL : AT 70º C FOR 72 HRS | ASTM D 471 | |||
| IN IRM OIL NO.901 | NOT RECOMMENDED | NOT RECOMMENDED | ||
| IN IRM OIL NO.902 | NOT RECOMMENDED | NOT RECOMMENDED | ||
| IN IRM OIL NO.903 | NOT RECOMMENDED | NOT RECOMMENDED | ||
| CHEMICAL RESISTANCE | ||||
| FIRE RESISTANCE | FMVSS 302 | PASSES | PASSES | |
| — OZONE | NOT RECOMMENDED | ASTM D 1149 | NOT RECOMMENDED | |
| — DILUTE ACIDS AND BASES | NOT RECOMMENDED | NOT RECOMMENDED | ||
| — CONCENTRATED ACIDS AND BASES | NOT RECOMMENDED | NOT RECOMMENDED | ||
| — OILS | NOT RECOMMENDED | NOT RECOMMENDED | ||
| — SOLVENTS | NOT RECOMMENDED | NOT RECOMMENDED | ||
| TEMPERATURE RANGE | -25º TO + 70º C | -25º TO + 70º C | ||
| COLOUR | BLACK | |||
| PROPERTIES | TEST METHOD | VALUES FPS UNITS | TEST METHOD | VALUES METRIC UNITS |
| SPECIFIC GRAVITY | DIN 53508 | 1.50 +- 0.05 | ASTM D297 | 1.50 +- 0.05 |
| HARDNESS | DIN 53505 | 65 ± 5 SH A | ASTM D2240 | 65 ± 5 SH A |
| TENSILE STRENGTH ( MIN ) | DIN 53504 | 497 PSI | ASTM D412 | 35 KG/CM2 |
| ELONGATION AT BREAK ( MIN ) | DIN 53504 | 250% | ASTM D412 | 250% |
| COMPRESSION SET (70 ºC/24 HRS/25% COMPRESSION) (MAX) | DIN 53517 | 30% | ASTM D395 METHOD B | 30% |
| CHANGE IN PROPERTIES AFTER | ||||
| HEAT AGEING ( 72 HRS. AT 70 ºC ) | ASTM D573 | |||
| — HARDNESS (PTS) | + 5 (MAX) | + 5 (MAX) | ||
| — TENSILE STRENGTH (%) | + 10 / – 25 | + 10 / – 25 | ||
| — ELONGATION AT BREAK (%) | + 10 / – 25 | + 10 / – 25 | ||
| VOLUME SWELL : AT 70º C FOR 72 HRS | ASTM D 471 | |||
| IN IRM OIL NO.901 | NOT RECOMMENDED | NOT RECOMMENDED | ||
| IN IRM OIL NO.902 | NOT RECOMMENDED | NOT RECOMMENDED | ||
| IN IRM OIL NO.903 | NOT RECOMMENDED | NOT RECOMMENDED | ||
| CHEMICAL RESISTANCE | ||||
| FIRE RESISTANCE | FMVSS 302 | PASSES | PASSES | |
| — OZONE | NOT RECOMMENDED | ASTM D 1149 | NOT RECOMMENDED | |
| — DILUTE ACIDS AND BASES | NOT RECOMMENDED | NOT RECOMMENDED | ||
| — CONCENTRATED ACIDS AND BASES | NOT RECOMMENDED | NOT RECOMMENDED | ||
| — OILS | NOT RECOMMENDED | NOT RECOMMENDED | ||
| — SOLVENTS | NOT RECOMMENDED | NOT RECOMMENDED | ||
| TEMPERATURE RANGE | -25º TO + 70º C | -25º TO + 70º C | ||
| COLOUR | BLACK | |||