Free delivery on orders over £1200.00, all other orders have a fixed rate of £20.00 + VAT.
*Terms and conditions apply
If you would like to discuss this product, or you require a sample, please call 01702 560194. Alternatively, you can use our contact form.
*Terms and conditions apply
If you would like to discuss this product, or you require a sample, please call 01702 560194. Alternatively, you can use our contact form.
Please note: All cut material is non-returnable unless faulty as these are non-sellable and have been cut to specific requirements.
Ecotile ESD X-Joint Grounding Kit
SKU: 16.102/6/1
Includes:
- 100m Conductive Grounding Tape
- Grounding Cord with 1 meg-ohm Resistor
- 1 x Earth Bonding Plug
- 1x 7mm ESD Tile with Grounding Stud
£197.40 Excl. VAT
Accessories kit to complete Ecotile ESD protected areas.
Instructions:
- Lay conductive tape on sub-floor in horizontal and vertical line to ensure each tile has contact to allow static to flow safely to the ground
- For metal raises access flooring, additional correx sheets should be laid to create a barrier between Ecotile ESD solution and the metal floor
- Add ground point every 50m2
Download Ecotile ESD X-Joint Grounding Kit Installation Guide
Download Ecotile ESD X-Joint Grounding Kit Cleaning Instructions
Technical Information