Free delivery on orders over £1200.00, all other orders have a fixed rate of £20.00 + VAT.
*Terms and conditions apply
If you would like to discuss this product, or you require a sample, please call 01702 560194. Alternatively, you can use our contact form.
*Terms and conditions apply
If you would like to discuss this product, or you require a sample, please call 01702 560194. Alternatively, you can use our contact form.
Please note: All cut material is non-returnable unless faulty as these are non-sellable and have been cut to specific requirements.
Ecotile ESD Interlocking X-Joint Floor Tile (4-pack)
SKU: CoruX500ESD
- Provides a traceable path to ground (> 3.4 x 104Ω and ≤ 5.0 x 106Ω)
- Prevents static generation (< 100 volts)
- Perfect to replace a failed/worn floor or create a new ESD protected zone
- No disruption or downtime during installation
- Can be lifted quickly (ideal for leased/temporary spaces)
- No wear layer is required. Ecotile ESD tiles do not loose their ESD properties over time
- A tile with a grounding stud is installed every 50m2 and is connected to an earthing point, allowing static to complete its circuit and flow safely to ground.
- Ecotile ESD flooring is installed over a grid of conductive tape laid on the subfloor which unifies conductivity through installed tiles.
From £68.60 Excl. VAT
High performance static-dissipative floor tiles that protect microelectronics, static-sensitive devices and explosives from damage caused by static discharge.
Dimensions:
- 500mm height
- 500mm width
- 7mm depth
- 9kg weight
Download Ecotile ESD Interlocking X-Joint Floor Tile (4-pack) Installation Guide
Download Ecotile ESD Interlocking X-Joint Floor Tile (4-pack) Cleaning Instructions
Technical Information