Free delivery on orders over £1200.00, all other orders have a fixed rate of £20.00 + VAT.
*Terms and conditions apply
If you would like to discuss this product, or you require a sample, please call 01702 560194. Alternatively, you can use our contact form.
*Terms and conditions apply
If you would like to discuss this product, or you require a sample, please call 01702 560194. Alternatively, you can use our contact form.
Please note: All cut material is non-returnable unless faulty as these are non-sellable and have been cut to specific requirements.
Ceramic Drum Lagging
SKU: CDL
- Improves belt traction
- Non slip grip between ceramic lagging and belt
- Reduces belt slippage
- Increase belt and pulley life
- Minimizes system downtime
- Increases productivity
- High resistance to wear
Call for Price
Technical Information
| DIMENSIONS | |||
| CODE | THICKNESS (MM) | WIDTH (MM) | LENGTH (MM) |
| SM 5-13 | 13 | 500 | 10000 |
| SM 5-15 | 15 | 500 | 10000 |
| SM 5-17 | 17 | 500 | 10000 |
| SM 5-20 | 20 | 500 | 10000 |
Note: Custom width and length also available.
| CERAMIC SPECIFICATIONS | RUBBER SPECIFICATIONS | ||
| Aluminium Oxide Al2O3 | 95% (min) | Hardness (Shore ‘A’) | 65+/-5 |
| Density (g/cc) | 3.65 (min) | Density (g/cc) | 1.12 to 1.17 |
| Hardness (R45N) | 77 (min) | Tensile Strength (Mpa) | 20.0 (min) |
| Flexural Strength (Mpa) | 240 (min) | Elongation (min) | 400% (min) |
| Abrasion by Rubbing (g) | 0.1 (max) | Abrasion (mm3) | 120 (max) |
Comparison Table for Co-efficient of Friction
| CO-EFFICIENT OF FRICTION | RUBBER LAGGING | CERAMIC LAGGING |
| Dry | 0.4 | 0.7 |
| Wet | 0.3 | 0.5 |
| DIMENSIONS | |||
| CODE | THICKNESS (MM) | WIDTH (MM) | LENGTH (MM) |
| SM 5-13 | 13 | 500 | 10000 |
| SM 5-15 | 15 | 500 | 10000 |
| SM 5-17 | 17 | 500 | 10000 |
| SM 5-20 | 20 | 500 | 10000 |
Note: Custom width and length also available.
| CERAMIC SPECIFICATIONS | RUBBER SPECIFICATIONS | ||
| Aluminium Oxide Al2O3 | 95% (min) | Hardness (Shore ‘A’) | 65+/-5 |
| Density (g/cc) | 3.65 (min) | Density (g/cc) | 1.12 to 1.17 |
| Hardness (R45N) | 77 (min) | Tensile Strength (Mpa) | 20.0 (min) |
| Flexural Strength (Mpa) | 240 (min) | Elongation (min) | 400% (min) |
| Abrasion by Rubbing (g) | 0.1 (max) | Abrasion (mm3) | 120 (max) |
Comparison Table for Co-efficient of Friction
| CO-EFFICIENT OF FRICTION | RUBBER LAGGING | CERAMIC LAGGING |
| Dry | 0.4 | 0.7 |
| Wet | 0.3 | 0.5 |