LinkedIn Tracking ‘Square Stud Pattern’ PVC Matting | Coruba Skip to content
Free delivery on orders over £1200.00, all other orders have a fixed rate of £20.00 + VAT.
*Terms and conditions apply

If you would like to discuss this product, or you require a sample, please call 01702 560194. Alternatively, you can use our contact form.

Please note: All cut material is non-returnable unless faulty as these are non-sellable and have been cut to specific requirements.

‘Square Stud Pattern’ PVC Matting

SKU: Coru666
  • Attractive low relief square studded pattern
  • Oil & Grease Resistant
  • Clean & Hygienic
  • Durable PVC compound
  • Slip resistant multi-directional patterned surface
  • Good floor to foot cold insulation properties
  • Economically priced
  • Cut lengths to order

Call for Price

Coru666 ‘Square Stud Pattern’ PVC Matting is an attractive and economic grade of PVC matting with a raised ‘Square Stud’ pattern design on one side and a plain, smooth reverse. Available in a choice of Black, Grey, Blue, Green or Red at 2.4mm stock thickness. Ideally suited for communal areas, walkways, tread mats, runners and general purpose industrial applications where a multi directional tread pattern is required.

This grade can be produced in varying width, length and thickness formats and in a variety of colours (RAL matched if needed) to special order. These would be subject to minimum batch run quantities, usually 500 M2 per size/colour.

STOCK ROLL SIZES [M X M X MM] WEIGHT [KG/M2]
10m x 1.1m x 2.4mm 3.5

 

SPECIFICATIONS COMPOUND VALUES [TYPICAL]
Colour Black/Grey/Blue/Red/Green
Compound PVC
Hardness [Shore A] 75°
Density [SG] 1.8
Tensile Strength: [MPA] 3.0
Elongation [min] 200%
Abrasion Resistance [mm³] 250
Minimum Temperature -20°C
Maximum Temperature +100°C
STOCK ROLL SIZES [M X M X MM] WEIGHT [KG/M2]
10m x 1.1m x 2.4mm 3.5

 

SPECIFICATIONS COMPOUND VALUES [TYPICAL]
Colour Black/Grey/Blue/Red/Green
Compound PVC
Hardness [Shore A] 75°
Density [SG] 1.8
Tensile Strength: [MPA] 3.0
Elongation [min] 200%
Abrasion Resistance [mm³] 250
Minimum Temperature -20°C
Maximum Temperature +100°C
Rubber Gaskets Quote Request
Cut Rubber Strips Quote Request
Cut Rubber Parts Quote Request