Free delivery on orders over £1200.00, all other orders have a fixed rate of £20.00 + VAT.
*Terms and conditions apply
If you would like to discuss this product, or you require a sample, please call 01702 560194. Alternatively, you can use our contact form.
*Terms and conditions apply
If you would like to discuss this product, or you require a sample, please call 01702 560194. Alternatively, you can use our contact form.
Please note: All cut material is non-returnable unless faulty as these are non-sellable and have been cut to specific requirements.
10mm High Impact Wall Protection EVA Foam Sheet
SKU: Coru714-10mm
- Heavy density foam [cushioned] construction
- Neat patterned matt black finish
- Good impact resistance
- Excellent sound and low temperature insulation properties
£21.50 Excl. VAT
The Coru714 Wall Protection Matting is a high density EVA foam Wall Protection sheet designed to protect walls from impacts. Finished off with a Cross Hatched Pattern from high quality EVA foam, these wall mats are designed to be dense, durable and lite. The Coru714 is specifically designed for giving ultimate cushioned protection for horse and livestock whilst protecting the wall as well. Now with an improved design with absorption disks on the reverse for greater wall protection.
- Lightweight for easy handling
- Dense EVA foam
- Easy to install with screws or Adhesive
- Newly developed absorption system
Technical Information
| Stock Roll Sizes [m x m x mm] | Weight[kg/Mat] | Specifications/Compound | Values [typical] |
|---|---|---|---|
| 1.8mx 1.2m x 10mm | 3.6 | Colour: | Black |
| 7.2 | Compound: | EVA | |
| Hardness [Shore C]: | 60/65 | ||
| Density | 120kg/M3 | ||
| Tensile Strength: [MPA] | N/A | ||
| Elongation [min]: | N/A | ||
| Abrasion Resistance [mm3] | N/A | ||
| Minimum Temperature | N/A | ||
| Maximum Temperature | N/A |
| Stock Roll Sizes [m x m x mm] | Weight[kg/Mat] | Specifications/Compound | Values [typical] |
|---|---|---|---|
| 1.8mx 1.2m x 10mm | 3.6 | Colour: | Black |
| 7.2 | Compound: | EVA | |
| Hardness [Shore C]: | 60/65 | ||
| Density | 120kg/M3 | ||
| Tensile Strength: [MPA] | N/A | ||
| Elongation [min]: | N/A | ||
| Abrasion Resistance [mm3] | N/A | ||
| Minimum Temperature | N/A | ||
| Maximum Temperature | N/A |