Coru625P Plastic barbed anchoring pegs used to secure our Coru625 mats to the ground.
When installing these pegs, they are designed to anchor into the ground first time, once installed removal will be difficult as they are a permanent solution and may require digging out for removal. Ensure you only use with a rubber mallet as metal hammers can destroy the pegs. Ensure pegs are secure and tight without movement after install to ensure they work correctly. Failure to install correctly and left loose could result in the mats moving thus not doing their job properly at protecting against falls, accidents and ground stabilisation.
Stock Roll Sizes[m x m x mm] | Weight | SpecificationsCompound | Values[typical] |
---|---|---|---|
145mm x 33mm | 50g Each | Colour: | Black |
Compound: | Plastic | ||
Hardness [Shore A]: | N/A | ||
Density [SG]: | N/A | ||
Tensile Strength: [MPA] | N/A | ||
Elongation [min]: | N/A | ||
Abrasion Resistance [mm3] | N/A | ||
Minimum Temperture | N/A | ||
Maximum Temperture | N/A |