Coru571-01 Fine Ribbed Grey EPDM Rubber Matting to IEC61111-2009 Class 1, is a high quality electrical safety matting fully tested to 20,000 volts with regulation standard stamped on reverse of roll at 1000mm intervals. Maximum safety working voltage of 7,500v.
It has a fine ribbed, anti-slip surface pattern on one side and a cloth impression finish on the reverse.
This Product is REACH, RoHS, PAH and CE Compliant
Due to the very high quality of METROSEAL raw materials the need for additional thickness is not necessary. The IEC:61111 specification only states ‘maximum’ thickness with minimum thickness being determined by suppliers ability to pass the correct tests defined in Clause 5 of specification. The above materials do so with the ‘integral’ layflat quality of the rubber compounds use not impaired in any way.
In addition to the above our thinner grades present less of a trip hazard when laid offering additional safety to operators. Standard finishes on this type is FINE RIBBED [corrugated] one side with an anti-creep impression on reverse.
|Stock Roll Sizes[m x m x mm]||Weight[kg/M2]||SpecificationsCompound||Values[typical]|
|10m x 1.0m x 3mm||4.3||Colour:||Grey|
|Hardness [shore A]:||65°|
|Abrasion Resistance:||180 mm3|
|Resistance to:||Please Call|
|Withstand Test||20 KV NO ELECTRICAL PUNCTURE|
|Puncture Proof Test||10KV for 3 minutes|
|Working Voltage||7,500 volts|